Filter
Top Products
©American DJ® - www.americandj.com - Super Jewel™ Instruction Manual Page 5
Super Jewel™ Control & Functions
1
2
5
4
3
6
8
7
6
10
9
11
©American DJ® - www.americandj.com - Super Jewel™ Instruction Manual Page 6
Super Jewel™ Control & Functions
1. Function Switch - This is a 3-way function switch. This unit can
be operated in three different mode all of which are controlled by this
switch.
2. Fan - This is fan cooled to ensure long life and durability. For opti-
mal performance and extended lamp life, keep this fan grill clean at all
times. Clogged fan grills will impede proper cooling which will lead to
overheating and reduced lamp life.
3. Microphone - This internal microphone receives low frequencies
to trigger the unit.
4. Fuse Holder - This housing stores the protective 5 amp fuse.
Always replace with the exact same type fuse.
5. Power Cord - Connect only to a matching power outlet. Never use
this fi xture if the ground prong has been removed or broken off.
6. Lamp Cover Retaining Screws - These thumb screws hold the
lamp socket assembly cover (11) into place. Loosen these screws to lift
the cover and access the lamp assembly.
7. Lens - This is a fully focusing high quality lens. Focus the lens by
manually sliding the lens in a back and forth.
8. Focusing Adjustment - This thumb screw holds the lens in place.
To focus the lens; loosen the thumb screw and slide the lens assemble
back and forth until you obtain your desire focus.
9. Dichroic Colored Mirror Dish - This is high quality dichroic colored
mirror dish. The dish rotates in clockwise/counter-clockwise direction
to the beat of the music.
10. Lamp Assembly - This assembly holds a ZB-64514 120v/300w
lamp.
11. Lamp Assembly Cover - This plate accesses the lamp socket
assembly. This cover is held securely in place by a two thumb screws
(6).