Filter
Top Products
©American DJ® - www.americandj.com - Trance Wheel™ Instruction Manual Page 5 ©American DJ® - www.americandj.com - Trance Wheel™ Instruction Manual Page 6
Trance Wheel™ Control & Functions
1
6
5
7
3
2
4
121110798
Trance Wheel™ Control & Functions
1. Mirror - This is a highly reective surface mirror specically designed
to optimize and enhance beam output. Never use glass cleaner that
contains ammonia to clean the surface of the mirror (such as Windex).
2. Lens - This is a fully focusing high quality lens. Focus the lens
by manually turning the lens in a clockwise or counter-clockwise direc-
tion.
3. Filter - This unit comes with a built-in glass lter. This lter may be
removed at any time for a completely different effect. To remove the
lter unscrew the retaining thumb screw and gently pull the lter out.
4. Lamp Assembly - This assembly holds a ZB-EFR 15v/150w lamp.
5. Lamp Assembly Retaining Screws - These two screw hold the
lamp assembly in place.
6. Lamp Assembly Cover - This plate accesses the lamp socket
assembly. This cover is held securely in place by a single thumb screw
(7).
7. Lamp Cover Retaining Screw - This thumb screw holds the lamp
socket assembly cover (6) into place
8. Function Switch - This is a 3-way function switch. This unit can
be operated in three different mode all of which are controlled by this
switch.
9. Microphone - This microphone receives external low frequencies
to trigger the unit in Sound-Active and Master/Slave mode.
10. Fan - Cooling fan. For optimal performance keep this fan grill clean
at all times.
11. Fuse Holder - This housing stores the protective 3 amp fuse.
Always replace with the same exact fuse.
12. Power Cord - Connect only to a matching power outlet. Never use
this xture is the ground prong has been removed or broken off.