American DJ XDM-221 Music Mixer User Manual


 
Inputs:
Microphone 1.5mV, 600 Ohm
Phono 1.2mV, 47kOhm
Line 100mV, 27kOhm
Output 28V, peak to peak
Frequency range 20Hz-20KHz, ± 1dB
Distortion <0,03%
S/N-ratio >75dB
Talkover -15dB
Tone control Treble: 10Khz ± 12dB
Bass: 100 Hz ± 12dB
Headphone impedance 16 Ohms
Power supply AC115/230V, 50/60Hz
Dimensions 10” W x 7.5” D x 3.75” H
256 x 192 x 100 mm
Weight 5 lbs. / 2.3 kg
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice. XDM-221 User Instructions page 5
Replacing the Crossfader
Instructions for replacing the crossfader:
• Disconnect from main power supply
• Remove the fader knob.
• Remove the two outer screws.
• Take the fader out and unplug the connection cable.
• Connect the new fader and replace back into mixer.
Technical Specifications - model XDM-221