Filter
Top Products
13. Master controls the overall output level of
the amplifier.
14. XLR Line Out supplies a mono line level sig-
nal for connecting to a mixing console, tape
recorder or external amplifier. The signal at this
jack is pre-Master and post-EQ.
15. Phones allows the connection of a pair of
stereo headphones for private practice ses-
sions. The internal speaker is disconnected
whenever headphones are used.
16. Line Out / Phones adjusts the output level
of the signal at the XLR Line Out jack (#14) and
the signal level at the Phones jack (#15).
17. Power light indicates the amplifier is turned
on by glowing an iridescent blue color.
18. Power switch is used to turn the amplifier
on and off.
19. Power cord (rear panel, not shown) con-
nects the amplifier to a suitable source of A.C.
voltage. The grounded power cord should only
be plugged into a grounded power outlet that
meets all applicable electrical codes and is com-
patible with the voltage, power and frequency
requirements stated on the rear panel. Do not
attempt to defeat the safety groung connec-
tion!
5
11 13 16
14
15
18
17
12