Filter
Top Products
B410H Series Bass Cabinets
Ampeg B410H Series 4x10 Bass Cabinets are quality
two-way speaker cabinets suitable for all venue sizes.
The cabinets feature heavy duty recessed handles,
removeable casters, and are built of void free baltic birch
plywood.
The jackplate features two 1/4” jacks wired in parallel,
allowing easy daisy chaining from one speaker to another.
Each of the jacks may be used as an input or a through con-
nection.
The three position HF Horn switch allows for:
• Full high frequency output (0 setting)
• High frequencies reduced by 6dB (-6 setting)
• Horn shutoff (off setting)
IMPORTANT SAFETY INSTRUCTIONS:
1.Read, follow and keep these instructions. Heed all warnings.
2.This speaker is capable of producing high sound pressure levels that may cause
permanent hearing damage. User caution is advised and ear protection is recom-
mended during use.
3.This speaker is designed for use on a sturdy, level surface. Whenever stacking
speaker cabinets, do not stack more than two high. Only speaker cabinets which
are equipped with caster cups on their top surfaces are to be used underneath a
cabinet which is equipped with casters.
4.Speaker cables are a tripping hazard and must be routed out of traffic areas and
away from any possible accidental contact.
5.Do not expose this speaker to rain or moisture. Do not place liquid filled contain-
ers on this speaker. Clean only with a damp cloth.
6.Repair or service of this speaker should be performed only by qualified personnel.