Astatic 220VP Microphone User Manual


  Open as PDF
of 2
 
Architects’ and Engineers’ Specications
The microphone will be an inconspicuous, continuously-
variable polar pattern, button-style, condenser boundary
microphone designed for surface installation. The
microphone will have a continuously-variable polar pattern.
Thesensitivityofthemicrophonewillbe–32dBV(25mv)
@ 1Pa. The frequency response will be 90Hz-17KHz. The
impedance of the microphone will be 120 ohms. The self-
noisewillbe24dBA.ThemaximumSPLwillbe120dB.
The microphone will include an integral 80Hz, 12dB/octave
high-pass lter to improve intelligibility. The microphone will
havea3-pinXLRM-typeconnectorallowingforbottomexit.
The microphone will operate from P12, P24 or P48 standard
phantompowerconsuming4mA.
The microphone element and electronics will be enclosed
inaradiofrequencyresistanthousingmeetingorexceeding
EN55103-2. The 220VP will be 3-3/8" [85mm] long, 1-1/8"
[28mm] in diameter and stands 3/4" [20mm] above
boundary. The net weight [mass] will be 3.9oz [0.11Kg]. The
packaged weight [mass] will be 5.0oz [0.14Kg]. The 220VP
will have durable matte-black urethane or matte-white
nish.
TheAstaticmodel220VPor220VPWisspecied.
220VP/220VPW
Continuously-variable Pattern Condenser Boundary Microphone
Astatic Commercial Audio Products
6573 Cochran Rd. Building I Solon, Ohio 44139 U.S.A.
Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 421-3161
www.astaticinstalled.com
Two-Year Limited Warranty
AstaticCommercialAudioProductsherebywarrantsthatthisproductwillbefreeofdefects
inmaterialandworkmanshipforaperiodoftwoyearsfromthedateofpurchase.Inthe
unlikelyeventthatadefectoccursAstaticwill,atitsoption,eitherrepairorreplacewitha
new unit of equal or greater value. Retain proof of purchase to validate the purchase date
and return it with any warranty claim.
Thiswarrantyexcludesexteriornishorappearance,damagefromabuse,misuseofthe
product,usecontrarytoAstatic’sinstructionsorunauthorizedrepair.Allimpliedwarranties,
merchantability,ortnessforaparticularpurposeisherebydisclaimedandAstatichereby
disclaims liability for incidental, special or consequential damages resulting from the use or
unavailability of this product.
This warranty gives you specic legal rights and you may have other rights that vary from
statetostate.Somestatesdonotallowtheexclusionorlimitationofincidentalorconsequential
damagesorlimitationsonhowlonganimpliedwarrantylasts,sotheaboveexclusionsand
limitations may not apply to you.
Note:Nootherwarranty,writtenororalisauthorizedbyAstaticCommercialAudioProducts.
Shipping Instructions
Please call our customer service department at 440-349-4900 for a pre-approved return
authorization number.
Carefullyrepacktheunitandreturntheinsuredpackageto:AstaticCommercialAudio
Products,6573CochranRoad,BuildingI, Solon, Ohio 44139.
RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION NUMBER WILL BE
REFUSED.
IfoutsidetheUnitedStates,contactyourlocaldealerordistributorforwarrantydetails.
©2008AstaticCommercialAudioProducts
Part No. 46873-87-00 Jun2008
Specications
†
Operating Principle............................................Condenser
Polar Pattern ........................................Continuously-variable
Frequency Response .......................................90Hz -17KHz
Sensitivity .........................................-32dBV(25mV)@1Pa
Impedance .............................................................120 ohms
Maximum SPL .................................120dB, 1% T.H.D., 1KHz
Self Noise ...................................................................18dBA
Power Requirements ............................P12,P24,P48,4mA
Connector ...................................................3-pin XLRM-type
Polarity ................................ Positive pressure on diaphragm
corresponds to positive voltage on pin 2
relative to pin 3 at XLR3M-type connector.
Finish ......................................Durable matte-black urethane
orwhite(220VPW)
Dimensions .....................................................(Seedrawing)
Net Weight [Mass] ......................................... 3.9oz [0.11Kg]
Packaged Weight [Mass] ...............................5.0oz [0.14Kg]
RF Immunity .........................MeetsorexceedsEN55103-2,
E1, E2, E3 and E4
RoHS Compliant
†
Specications subject to change without notice.
Included Accessories ..............................2 rubber bushings,
hexnutandwasher
Omnidirectional
Cardioid
Figure-of-eight
 previous