1.Connect a desired number of microphones to
the microphone inputs on the AKJ7002.
2.Turn on the power of the AKJ7002 and other
needed components.
3.Select a karaoke music source.
4.Adjust the music volume, balance, and tone.
5.Adjust each microphone volume by adjusting
the individual mcirophone VOLUME control knobs.
6.Adjust the desired relative volumes between
microphones and music by adjusting the
MIC MASTER VOLUME and MUSIC MASTER
VOLUME control knobs.
7.Adjust the echo volume, tone, repeat, and delay.
8.Adjust the individual microphone echo volume by
adjusting the echo volume control knobs in the
MIC1 and MIC2/3 channels.
9.Press the KEY CONTROL button to set the
desired key.
Notes for Proper Use of a Microphone
Hold a microphone to have the top of its windscreen
1 to 2 inches away from your mouth.
To get the best pickup result, point the microphone
toward your mouth.
To ensure a clear vocal output, do not block the lower
part of the microphone windscreen. Blocking the lower
part of the microphone windscreen will disturb the
proper voice reproduction with an unclear bass which
tends to cause the feedback (howling) results.
GENERAL OPERATION
10
1
5
6
2
3 3
4
7
9
8
6
INPUTINPUT
DOWNDOWN
AA
bb
INPUTINPUT
NATURALNATURAL
UP UP
B
##
AKJ7002
Professional Karaoke
Mixing Amplifier
with Digital Echo
& Key Controls
16-BIT DIGITAL KEY CONTROL