Filter
Top Products
Connecting to an Audio Mixer or TV with RCA Audio Inputs
1.Audio Output 1 & 2 Connections:
What you will need
using 1 RCA L/R (red & white) stereo RCA cable (included)
using two XLR-type audio cables(not included)
using 1 audio mixer or TV with RCA audio inputs
Connect one end of the L/R (red & white) RCA cable to the red
and white audio outputs labeled
AUDIO OUTPUT 1 & 2 on the rear panel of the .
Connect the other end of the L/R (red & white) RCA cable to
the audio input on an audio mixer or TV.
●
●
●
●
●
●
●
●
●
using two ¼-inch audio cables (not included).
using three ¼-inch stereo audio cables (not included).
using one audio amplifier with XLR audio inputs.
using one audio amplifier with ¼-inch audio inputs.
AKJ780E
Basic Connections
12
To power the
What you will need
AC power cord (included)
Surge-protector (recommended) or a power outlet
Connect the AC end of the power cord into the AC input on the rear panel of the
Connect the other end to a surge-protector or available power outlet
●
●
Note: Before turning on the power make sure the red voltage selector [Fig. A] under
the AC input is set to the proper voltage. It should be set to 115V for North America
and 230V for most European countries. Make sure you know the proper voltage for
your region before turning on the .
1.
2.
AKJ780E
AKJ780E
AKJ780E
115
VOLTAGE SELECTOR
[Fig. A]
Since the AKJ780E contains built-in power amplifiers, speakers, DVD/CDG/CD player, USB player, and SD
card player, the AKJ780E can be used as a self-contained sound system. Furthermore, the AKJ780E contains
various audio video outputs to allow the AKJ780E to be connected to multiple TV sets, external sound
systems, and/or multiple sound effect devices. The following content demonstrates the procedures for
connecting the AKJ780E to the AC outlet and other audio video devices.
Connecting to the AC Outlet
2.Balanced Audio Output Connections:
●Connect one end of the XLR cables to the left and right BALANCED AUDIO OUTPUT jacks on the AKJ780E.
● .Connect one end of the XLR cables to the left and right AUDIO/LINE/AUX INPUT jacks on the external device