Filter
Top Products
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224 330/686-2600
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England 0113 277-1441
Form No. 0315-7053-00-B/W ©1995 Audio-Technica U.S., Inc. Printed in U.S.A.
One-Year Limited Warranty
Audio-Technica microphones and accessories purchased in the U.S.A. are warranted
for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free
of defects in materials and workmanship. In event of such defect, product will be
repaired promptly without charge or, at our option, replaced with a new product of
equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, pre-
paid, together with the sales slip or other proof of purchase date.
Prior approval
from A.T.U.S. is required for return.
This warranty excludes defects due to normal
wear, abuse, shipping damage, or failure to use product in accordance with instructions.
This warranty is void in the event of unauthorized repair or modification.
For return approval and shipping information,
contact the Service Department,
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law,
A.T.U.S. will have no liability
for any consequential, incidental, or special damages; any warranty of mer-
chantability or fitness for particular purpose expires when this warranty
expires.
This warranty gives you specific legal rights, and you may have other rights which
vary from state to state.
Outside the U.S.A., please contact your dealer for warranty details.
AT8415 Specifications
Height 4.25" (108.0 mm)
Depth 2.75" (70.0 mm)
Ring Diameter 2.32" (59.0 mm)
Net Weight 3 oz (85 grams)
Minimum Microphone Diameter 0.5" (12.7 mm)
Maximum Microphone Diameter 2.13" (54.1 mm)
Microphones Accepted Cylindrical or tapered
within the limits above
Suspension System Four chloroprene bands
Swivel Rotation 360°
Attenuation 8 dB to 10 dB broadband
(depends on microphone
response, construction and
mass)
AT8410a Specifications
Height 5.23" (133.3 mm)
Depth 3.93" (99.7 mm)
Ring Diameter 3.11" (79.0 mm)
Net Weight 6.3 oz (179 grams)
Minimum Microphone Diameter 0.66" (16.8 mm)
Maximum Microphone Diameter 1.13" (28.8 mm)
Microphones Accepted Cylindrical or tapered
within the limits above
Clamping System Spring-loaded “clothes-pin”
Suspension System Elastic shock cord
Swivel Rotation 180°
Attenuation 8 dB to 10 dB broadband
(dependsonmicrophone
response, construction and
mass)
AT8410a Dimensions
AT8415 Dimensions
79.0 mm
3.11"
99.7 mm
3.93"
5.23"
133.3 mm
3.12"
79.3 mm
108.0 mm
4.25"
70.0 mm
2.75"
3.38"
86.0 mm
4.00"
101.6 mm
54.1 mm
2.13"
59.0 mm
2.32"