Filter
Top Products
Specifications
†
ELEMENTS (TWO) Externally polarized (DC bias) capacitor
POLAR PATTERN Cardioid (Unidirectional)
FREQUENCY RESPONSE 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY (1 kHz) –34 dB (19.9 mV) ± 2 dB, re 1V at 1 Pa*
1
IMPEDANCE 200 ohms
MAXIMUM INPUT SOUND LEVEL 150 dB SPL, 1 kHz at 1% T.H.D.
149 dB SPL, 1 kHz at 0.5% T.H.D.
NOISE, TYPICAL (A-WEIGHTED)
2
19 dB SPL
DYNAMIC RANGE, TYPICAL 131 dB, 1 kHz at 150 dB SPL
SIGNAL-TO-NOISE RATIO, TYPICAL 75 dB, 1 kHz at 1 Pa*
POWER REQUIREMENTS AT8560 power supply (120V/230V AC)
WEIGHT (LESS CABLES)
Microphone only 22.6 oz (640 grams)
Microphone w/shock mount 33.5 oz (950 grams)
Power supply 4.19 lbs (1.9 kilograms)
DIMENSIONS
Microphone 8.27" (210.0 mm) long,
2.10" (53.4 mm) maximum body diameter
Power supply 8.27" (210.0 mm) W x
8.86" (225.0 mm) D x
1.73" (44.0 mm) H
ACCESSORIES FURNISHED AT8560 power supply; AT8447 shock mount for
5
/8"-27 threaded stands; 32.8' (10 m) cable with
6-pin XLR-type connectors for use between
microphone and power supply; AC power
cable; rack-mount adapters for power supply;
protective mic carrying case
† In the interest of standards development, A.T.U.S. offers
full details on its test methods to other industry professionals
on request.
* 1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
1
Measured at diaphragm
2
Using Audio Precision System One
Optional Accessories:
• AT 8137 large cylindrical foam windscreen.
• AT8314 2-conductor, shielded, vinyl-
jacketed, broadcast-type cable with
XLRF-type connector at microphone
end, XLRM-type connector at equipment
end. Available in 10', 20', 25', 30', 50'
& 100' lengths.
• AT8430 stand clamp for
5
/8"-27
threaded stands.
AT4060
Form No. 0345-0825-00-B/W 1998 Audio-Technica U.S., Inc. Printed in U.S.A.
Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
Dimensions
One-Year Limited Warranty
Audio-Technica microphones and accessories purchased in
the U.S.A. are warranted for one year from date of purchase
by Audio-Technica U.S., Inc. (A.T.U.S.) to be free of defects
in materials and workmanship. In event of such defect, product
will be repaired promptly without charge or, at our option,
replaced with a new product of equal or superior value if
delivered to A.T.U.S. or an Authorized Service Center, pre-
paid, together with the sales slip or other proof of purchase
date.
Prior approval from A.T.U.S. is required for return.
This warranty excludes defects due to normal wear, abuse,
shipping damage, or failure to use product in accordance
with instructions. This warranty is void in the event of
unauthorized repair or modification, or removal or defacing
of the product labeling.
For return approval and shipping information,
contact
the Service Department, Audio-Technica U.S., Inc., 1221
Commerce Drive, Stow, Ohio 44224.
Except to the extent precluded by applicable state law,
A.T.U.S. will have no liability for any consequential,
incidental, or special damages; any warranty of
merchantability or fitness for particular purpose expires
when this warranty expires.
This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
Outside the U.S.A., please contact your local dealer for
warranty details.
Polar Pattern
Frequency Response
AT4060
19.0 mm
21.0 mm
0.75"
0.83"
53.4 mm
2.10"
210.0 mm
8.27"
240°
SCALE IS 5 DECIBELS PER DIVISION
200 Hz
1 kHz
8 kHz
5 kHz
LEGEND
210°
180°
120°
150°
270°
300°
330°
0°
90°
30°
60°
100
LEGEND
50
20k
Frequency in Hertz
12" or more on axis
200
500
1k
2k
5k
10k
Response in dB
10 dB