Filter
Top Products
9
Microphone
ATR USB Mic
Working
Microphone
SigmaTel C-Major Audio
Working
Preliminary setup with Windows Vista
1. Plug the free end of the USB cable into the USB port on your computer. The microphone’s blue
LED will illuminate, indicating the mic is receiving power. Your computer will automatically
recognize the USB device and install a driver.
2. In the lower right portion of your screen you may see a message that new hardware was found;
or you may see a driver software installation notice.
3. To select the ATR2500-USB as your default recording device, begin at your Start menu.
Select Control Panel.
4. Select (double-click) Sound.
5. Select the Recording tab. Make sure that the AT2500-USB microphone is set as the default
recording device. (You should see a green check mark beside the USB microphone icon.)
Your preferences are now set to use the ATR2500-USB with Windows Vista with the recording
program of your choice.