Filter
Top Products
Page 17 of 17
For service, support or more information contact the BEHRINGER location nearest you:
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands.
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
XENYX X2442USB
X2222USB / X1832USB
X1622USB / X1222USB
X1204USB / 1204USB
Specications
Mono Inputs
Microphone inputs (XENYX Mic preamp)
Type XLR connector, electronically
balanced, discrete input circuit
Mic E.I.N.1 (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB 130.5 dB A-weighted
Frequency response (–1 dB) <10 Hz - 150 kHz (-1 dB)
Frequency response (–3 dB) <10 Hz - 200 kHz (-3 dB)
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance 2.6 k Ohms balanced
Signal-to-noise ratio 110 dB A-weighted
(0 dBu In @ +22 dB GAIN)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Phantom Power Switchable, +48 V
Line Input
Type ¼" TRS jack,
electronically balanced
Impedance 20 k Ohms balanced,
10 k Ohms unbalanced
Gain range -10 dB to +40 dB
Max. input level 30 dBu
Frequency Response (Mic In – Main Out)
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo Inputs
Type ¼" TRS jack, balanced
Impedance 20 k Ohms balanced,
10 k Ohms unbalanced
Gain range -20 dB to +20 dB
Max. input level +22 dBu
CD/Tape In
Type RCA connector
Impedance 10 k Ohms
Max. input level +22 dBu
Equalizer 3-band
LOW 80 Hz / ± 15 dB
MID 2.5 kHz / ± 15 dB
HIGH 12 kHz / ± 15 dB
Equalizer 3-band Semi-Parametric
LOW 80 Hz / ± 15 dB
FREQ Variable 100 Hz - 8 kHz
MID / ± 15 dB
HIGH 12 kHz / ± 15 dB
Equalizer 4-band Fixed
LOW 80 Hz / ± 15 dB
LOW MID 500 Hz / ± 15 dB
HIGH MID 3 kHz / ± 15 dB
HIGH 12 kHz / ± 15 dB
AUX Sends
Type ¼" mono jack, unbalanced
Impedance 120 Ohms
Max. output level +22 dBu
AUX Returns
Type ¼" TRS connector, balanced
Impedance 20 k Ohms balanced,
10 k Ohms unbalanced
Max. input level +22 dBu
Main Outputs
Type XLR, electronically balanced
Impedance 240 Ohms balanced,
120 Ohms balanced
Max. output level +28 dBu
Control Room Output
Type ¼" TS connector, unbalanced
Impedance 120 Ohms
Max. output level +22 dBu
Phones Output
Type ¼" TRS jack, unbalanced
Max. output level +19 dBu / 150 Ohms (+25 dBm)
CD/Tape Out
Type RCA connector
Impedance 1 k Ohms
Max. output level +22 dBu
DSP
Converter 24-bit Texas Instruments
24-bit Sigma-Delta
64/128-times oversampling
Sampling Rate 40 kHz
Main Mix System Data (Noise)
Main mix @ -∞, -105 dB / -108 dB channel fader
@ -∞ A weighted
Main mix @ 0 dB, -95 dB / -97 dB channel fader
@ -∞ A weighted
Main mix @ 0 dB, -82.5 dB / -85 dB channel fader
@ 0 dB A weighted
Power Supply
Mains voltage 100 - 230 V~, 50/60 Hz
Mains connector Standard IEC receptacle
USB
Connecter Type B
Converter 16-bit
Sample Rate 48 kHz
Please note these specifications are preliminary and conceptual in nature, and as such are subject
to change as product development progresses. This information is supplied for market research
purposes only and is not to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.