Filter
Top Products
5 TRUTH B2031A/B2030A User Manual
1. Introduction
The TRUTH features two separate ampliers for bass and high frequencies,
sporting loads of power reserve. On the bass end, a long-excursion woofer
embedded in a sturdy cast-aluminum casing springs into action. The scope
is broadened downward by using a special bass reex system. In the upper
frequency range, a specially developed dome tweeter provides for subtle signal
reproduction. The chassis and the ampliers are protected from overload using
a sophisticated circuitry. The speakers are magnetically shielded, so you can use
your TRUTH near computer monitors or TV sets. The audio signal is separated
using an active crossover that guarantees accurate frequency separation and
perfect tuning of both speakers among each other.
We recommend that you experiment with your TRUTH away from the
pressuresofa recording session, in order to get a feel for it. It will be a good
ideato listen to your favorite CD’s over the TRUTH, so that you can get an
impression of the neutral sound this speaker produces—which might be
somewhat unusualat rst!
◊ The following user’s manual is intended to familiarize you with the
unit’s control elements, so that you can master all the functions.
After having thoroughly read the user’s manual, store it at a safe
place for future reference.
Caution
◊ The TRUTH is capable of producing extreme volumes. Please bear in
mind, that high sound pressures do not only temporarily damage your
sense of hearing, but can also cause permanent damage. Be careful to
select a suitable volume.
1.1 Before you get started
1.1.1 Shipment
The TRUTH was carefully packed at the factory to assure secure transport.
Shouldthe condition of the cardboard box suggest that damage may have
takenplace, please inspect the unit immediately and look for physical
indicationsof damage.
◊ Damaged units should NEVER be sent directly to us. Please inform the
dealer from whom you acquired the unit immediately as well as the
transportation company from which you took delivery of the unit.
Otherwise, all claims for replacement/repair may be rendered invalid.
1.1.2 Initial operation
Please make sure the unit is provided with sucient ventilation, and never
placethe TRUTH on top of an amplier or in the vicinity of a heater to avoid the
risk of overheating.
◊ Before plugging the unit into a power socket, please make sure you
have selected the correct voltage:
The fuse compartment near the power plug socket contains three triangular
markings. Two of these triangles are opposite one another. The voltage indicated
adjacent to these markings is the voltage to which your unit has been set up,
andcan be altered by rotating the fuse compartment by 180°.
Caution
◊ This does not apply to export models that were for example
manufactured only for use with 120 V!
◊ If you alter the unit’s voltage, you must change the fuse accordingly.
The correct value of the fuse needed can be found in the
chapter “Specifications”.
◊ Faulty fuses must be replaced with fuses of appropriate rating without
exception! The correct value of the fuses needed can be found in the
chapter ”Specifications“.
Power is delivered via the cable enclosed with the unit. All requiered safety
precautions have been adhered to.
◊ Please make sure that the unit is grounded at all times. For your own
protection, you should never tamper with the grounding of the cable or
the unit itself.
◊ The sound quality may diminish within the range of powerful
broadcasting stations and high-frequency sources. Increase the
distance between the transmitter and the device and use shielded
cables for all connections.
1.1.3 Online registration
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our
website (http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and eciently.
Thank you for your cooperation!