Filter
Top Products
5 SINGLE DIAPHRAGM CONDENSER MICROPHONE B-5 User Manual
Level Setting/Adjusting the Basic Sound7.
Adjust the gain control in the microphone channel of your mixing console so
that the peak LED lights up only occasionally or never at all. The EQ controls
in the microphone channel should be set to mid-travel position to start with;
low-cut lter and level attenuation should be o. Try to achieve the desired sound
by experimenting with the microphone position. Often, it will be useful to set up
acoustic barriers (“baes”) at various angles towards the signal source. Only when
the desired basic sound has been achieved, should you start using equalizers and
signal processors, if any at all. Remember: less is often more!
0 dB
-5 dB
-10 dB
-15 dB
-20 dB
-25 dB
-30 dB
180˚
150˚
120˚
90˚
60˚
30˚
210˚
240˚
270˚
300˚
330˚
0˚
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
Polar pattern (cardioid)
dB
20.0
10.0
-10.0
-20.0
50.0 100.0
Low cut
1000.0 10k 15k20k Hz
0.0
Frequency response (cardioid)