Behringer C-1U Microphone User Manual


 
2 C-1U User Manual
Terminals marked with this symbol
carry electrical current of sucient
magnitude to constitute risk
of electric shock. Useonly high-quality
commercially-available speaker cables
with ¼"TS plugs pre-installed. Allother
installation or modication should be
performed only by qualiedpersonnel.
This symbol, wherever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside the enclosure -voltage that may be
sucient to constitute a risk ofshock.
This symbol, wherever it appears,
alertsyou to important operating
and maintenance instructions in the
accompanying literature. Please read themanual.
Condenser microphones are
extremely moisture-sensitive.
Never use your microphone in close
proximity to water (e.g. bath tubs, wash basins,
sinks, washing machines, pools, etc.).
Caution
Always use the power
supply specied in the
operating instructions.
Caution
Take care not to drop your
microphone as this can lead to
severe damage. BEHRINGER assumes no liability
for any damage caused by the user.
After each use, wipe the
microphone down with a soft cloth
and place it back into its
protective casing (included with the
microphone). The small bag containing the
moisture-absorbing crystals should remain in
the casing to help keep your microphone dry.
Caution
Never dismount the screen holding
the capsule, as this can damage
the microphone! Never try to modify the printed
circuit board inside your C-1U! This can lead to
microphone damage that cannot be repaired.
Any such attempt will void the warranty.
In exceptional cases, external interference
(e.g. contact and electrostatic discharge) may
aect the functioning of the unit and result in
audio or functional impairment. In any such
case, please disconnect the unit briey from the
USB port and restart the application to return to
normal operation.
The sound quality may diminish within the
range of powerful broadcasting stations and
high-frequency sources. Increase the distance
between the transmitter and the device and use
shielded cables for all connections.
Important Safety
Instructions