Filter
Top Products
3
SPECIFICATIONS
Mono inputs 1-12
Microphone input
Type electronically balanced,
discrete input stage
Connector XLR
Gain +10 to +60 dB (PAD = -20 dB)
Input impedance approx. 1,5k
Ω @ 1 kHz
THD + Noise 0.05 %, 20 Hz to 20 kHz, +60 dB
gain, -42 dBu at input
Max. input level +1 dBu (minimum gain)
S/N ratio 95 dB, 20 Hz to 20 kHz, gain 1,
0 dBu at input
Equivalent noise -90 dB, 20 Hz to 20 kHz, input
termination: 150 Ω
Crosstalk < -85 dB (channel 1 against chan-
nel 2), +60 dB gain, -42 dBu at input
Line input
Type electronically balanced
Connector 1/4" TRS connector
Gain -10 to +40 dB (PAD = -20 dB)
Input impedance approx. 16k Ω @ 1 kHz
THD + Noise 0.02 %, 20 Hz to 20 kHz,
+20 dB gain, -20 dBu at input
Max. input level +24 dBu (minimum gain)
S/N ratio 92 dB, 20 Hz to 20 kHz,
gain 1, 0 dBu at input
Equivalent noise -88 dB, 20 Hz to 20 kHz,
input termination: 150 Ω
Crosstalk < -90 dB (channel 1 against chan-
nel 2), gain 1, 0 dBu at input
Stereo inputs 13-16
Type electronically balanced
Connector 1/4" TRS connector
Gain -20 to +20 dB
Input impedance approx. 20k Ω @ 1 kHz
THD + Noise 0.015 %, gain 1, 0 dB at input,
measured at main out
Max. input level +22 dBu (minimum gain)
S/N ratio 86 dB, 20 Hz to 20 kHz, gain 1
(measured at main out)
Equivalent noise -85 dB, 20 Hz to 20 kHz,
(measured at main out) input termination: 150 Ω
Crosstalk < -85 dB (channel 13 against chan-
(measured at main out) nel 14), gain 1, 0 dBu at input
Main outputs
Type servo-balanced
Connector XLR
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
Multi outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
Control Room outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω @ 1 kHz
Max. output level +16 dBu
S/PDIF digital input/output
Input
Connector RCA
Special feature Sample rate converter
(32 to 50 kHz)
Output
Connector RCA
Dither 16, 20 and 24 bits
Special feature Noise shaping
Wordclock input/output
Input
Connector BNC
Input impedance 20 kΩ
Output
Connector BNC
Output impedance 30 Ω
Signal type TTL level square wave
SMPTE input
Connector XLR
Input impedance 20k Ω
RS232 port
Connector 9-pin DIN jack
Transmission 115,200 bauds, 8 data bits,
1 stop bit, no parity
System specifications
Sampling rate 44.1 and 48 kHz
(internal and external)
Signal delay <1.6 ms at 48 kHz, channel input
against main out
Frequency response 20 Hz to 20 kHz, +/- 0.1 dB
Faders
Type 100-mm ALPS
®
motorized faders
Resolution +12 from 0 to -oo dB
(256 increments)
Converters
A/D converters
Resolution 24-bit delta-sigma AKM
®
Oversampling 128 times
Dynamic range 116 dB typ.
D/A converters
Resolution 24-bit delta-sigma CRYSTAL
®
Oversampling 128 times
Dynamic range 106 dB typ.
MIDI interface
Type 5-pin DIN jacks
Connectors MIDI IN, MIDI THRU and MIDI OUT
Level meters
Channel 16-digit LED display
Main 2 x 16-digit LED display
Special feature Peak-hold function
(off, 0-29 s, and oo)
Mono inputs 1-12, microphone (minimum gain)
Sig LED -46 dBu at input
Clip LED 0 dBu at input
Mono inputs 1-12, line (minimum gain)
Sig LED -25 dBu at input
Clip LED +23 dBu at input
Stereo inputs 13-16 (gain at center position)
Sig LED -36 dBu at input
Clip LED +10 dBu at input
Accessories
ADT1616 16 (2 x 8) inputs and 16 (2 x 8) output,
ADAT
®
digital interface (optical)
TDIF1616 16 (2 x 8) inputs and 16 (2 x 8) outputs,
TDIF digital interface (25-pin D-Sub)
AES808 8 inputs and 8 outputs, AES/EBU
digital interface (25-pin D-Sub)
ACB808P 19" interface box for AES808, with
4 x XLR inputs and 4 x XLR outputs
Power supply
Power consumption approx. 68 W
Fuse 100 to 240 V ~: T 4 A H
Mains connector Standard IEC receptacle
Physical
Dimensions (H * W * D) approx. 6 ½" x 17 ¼" x 22 ½"
(163 mm x 438 mm x 572 mm)
Weight (net) approx. 29 ¾" lbs (13.5 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.