Filter
Top Products
25
EUROGRAND EG2080-RW/BK
V Accept/ignore MIDI controller information
Use this function to determine how the EG2080 responds to MIDI
controller data. MIDI uses a variety of controller informaiton to
control sound changes (e.g. pedal status, volume, effect
intensity).
Function: E7.5
Value: On, Off
Description:
On: Controller data are sent and received (default setting)
Off: Controller data are neither sent nor received
The EG2080 only responds to the commands listed
in the MIDI implementation chart if controller data
are enabled (see chapter 10.5).
V MIDI transposition
This function determines whether outgoing MIDI data are
transposed independently of the built-in sound generator. This
can be useful to play the sounds of an external sound module
whose sound generator is controlled from the keyboard of the
EG2080 in a different pitch than the internal sounds of the
EG2080.
Function: E7.6
Value: -12x12
Description:
0: No transposition of the pitch at the MIDI output (default
setting)
1x12: Pitch is transposed up by the number of half-tones
selected
-1x-12:
Pitch is transposed down by the number of half-tones
selected
This setting has no effect on the sound generator
of the EG2080!
V Send control panel settings (snapshot)
Use this function to transmit the current settings of the EG2080
(e.g. sounds and effects, channel volume) via the MIDI output.
This type of transmission only includes system-exclusive data
packages (MIDI dump).
Function: E7.7
Value: -
Description:
1) Connect the EG2080 to a computer or hardware sequencer
as described in chapter 7.3.2.
2) Set the MIDI sequencer to reception-ready mode.
3) Select the function E7.7 in EDIT mode.
4) Press the +/YES button to execute the transmission.
When the transmission is complete, the display shows End.
You can send the data back to the EG2080 at a later
date. To do this, use the MIDI IN jack to connect the
EG2080 to the device that received the data before.
As soon as you start the transmission from the
MIDI sequencer, the EG2080 will automatically
receive the data. Make sure that neither DEMO,
EDIT or music sequencer mode is active!
V Sending music sequencer data
Use this function to send music sequencer data via the MIDI
output of the EG2080. This allows you to archive recorded music
pieces on your music computer or hardware MIDI sequencer.
This type of transmission is only for system-exclusive data
packages (MIDI dump), but not for MIDI playing data.
Function: E7.8
Value: -
Description:
1) Connect the EG2080 to a computer or hardware sequencer
as described in chapter 7.3.2.
2) Set the MIDI sequencer to reception-ready mode.
3) Select the function E7.8 in EDIT mode.
4) Press the +/YES button to execute the transmission.
When the transmission is complete, the display shows End.
You can send the data back to the EG2080 at a later
date. To do this, use the MIDI IN jack to connect the
EG2080 to the device that received the data before.
As soon as you start the transmission from the
MIDI sequencer, the EG2080 will automatically
receive the data. Make sure that neither DEMO,
EDIT or music sequencer mode is active!
7. CONNECTION TO EXTERNAL EQUIPMENT