Behringer LD6230 Recording Equipment User Manual


  Open as PDF
of 2
 
2 EUROLIGHT LD6230 Specifications
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO
AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR
MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC GROUP IP LTD. TRIDENT CHAMBERS,
WICKHAMS CAY, P.O. BOX 146, ROAD TOWN, TORTOLA, BRITISH VIRGIN ISLANDS
EUROLIGHT LD6230
Professional 6-Channel 10 A Dimmer Pack with DMX and Analog Control
6-channel, DMX/analog-controlled dimmer pack with up to 10 A load per channel
3-phase mains supply (one phase possible at lower output power)
Standard DMX512 interface
Additional 8-pin DIN connector for analog control (0 – 10 V)
Adjustable Preheat and Limiter function to extend bulb life
Precise “curve” function enables selection of dierent fade modes
Switch option for simple on/o control of each channel
Automatic digital input check to detect DMX signal errors
Manual mode for dimming capability without an external lighting console
Automatic store function saves all settings after leaving Conguration mode
3-digit display and dedicated control LEDs for better indication in dark environment
Harting and CEE connection options (connectors not included)
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany
Specications
Channels
Number 6
Load per channel 0.2 A min./10 A max.
Maximal load per channel 10 A using a 3-phase connector
Frequency 50/60 Hz
Inputs
Power supply 3-phase connector, internal
terminal block/PG cable screw joint,
CEEconnector (optionalinstallation by
qualiedprofessional)
Analog 0 to +10 V via 8-pin DIN
Digital DMX512 via 5-pin XLR
Outputs
Digital DMX512 via 5-pin XLR
Load Internal terminal block/PG cable screw
joint, HARTING (optional installation by
qualiedprofessional)
System Fuses
Load securing per channel 10 A cable protection switch (type C)
Control section fuse 2 x T 100 mA H/250 V (EU)
1 x T 160 mA H/250 V (EU)
2 x T 160 mA H/250 V (UL)
1 x T 315 mA H/250 V (UL)
Power Supply
Voltage
USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 240 V~, 50 Hz
Maximum power consumption 3 x 20 A
Dimensions/Weight
Dimensions (H x W x D) approx. 3 ⁄ x 19 x 15 ⁄"
approx. 84.3 x 482.6 x 403.8 mm
Weight approx. 21.6 lbs / 9.80 kg
 previous