Filter
Top Products
Page 2 of 5
Powered via external power supply
(included) or P16-I / P16-D
Mounts easily on a mic stand
with the P16-MB mic stand mount
(not included)
P16-I — 16-Channel 19" Input Module
with Analog and ADAT Optical Inputs
Converts 16 analog inputs into 24-bit
digital audio to be transmitted via
standard CAT5e cable
2 x 8-channel ADAT optical inputs
with auto detect and priority select
16 balanced, high-headroom
TRS audio inputs
State-of-the-art 24-bit A/D
converters for premium
audio quality
4-position gain switches per channel
pair (-10, 0, +4, +22 dB)
Digital inputs support 44.1 and 48
kHz sample rates
Ultra-low system latency of less than
1 millisecond
Signal Present and Clip LEDs per
channel plus ADAT status LEDs
Standard CAT5e connection
delivers power and signals for up to
6 Personal Mixers
ULTRANET expansion network
connector (RJ45)
Internal autorange power supply for
maximum exibility (100 – 240 V~),
noise-free audio, superior transient
response plus low power
consumption for energy saving
Easy Installation
A basic installation consists of one
P16-I audio interface, which connects to
the main mixing console, and up to six
P16-M Personal Mixers, creating a system
big enough to equip a typical recording
studio, a small to medium-sized band,
or a worship team. You’ll also need a
few standard audio and CAT5 cables.
Theoptional P16- MB mounting bracket
allows the P16-M Digital Personal Mixer to
be attached to any standard microphone,
music or drum stand. The system can
easily be expanded via the P16-D Digital
ULTRANET Distributor, six of which can
be combined to drive up to forty-eight
P16-M Personal Mixers.
Extraordinary Value
The POWERPLAY P16 puts total control
of the monitor system where it belongs—
in the hands of the performers, freeingup
the engineer to sculpt the perfect
front-of-house mix. The POWERPLAY P16
system is the easy, aordable way to tame
runaway stage volume and give your
musicians and vocalists what they really
want—“moreme!”
Continued on next page
POWERPLAY 16
P16