Filter
Top Products
Page 3 of 3
©2011 Red Chip Company Ltd. Technical specifi cations and appearance subject to change without notice. The information contained herein is correct at the time of printing. All trademarks are the property of their respective owners. BEHRINGER accepts no liability for any loss which
may be suff ered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. 985-10000-00382
For service, support or more information contact the BEHRINGER location nearest you:
Europe Tel.: +49 2154 9206 4149
Fax: +49 2154 9206 4199
USA/Canada Tel.: +1 425 672 0816
Fax: +1 425 673 7647
Singapore Tel.: +65 6845 1800
Fax: +65 6214 0275
Australia Tel.: +61 03 9877 7170
Fax: +61 03 9877 7870
Japan Tel.: +81 3 5281 1180
Fax: +81 3 5281 1181
PEDAL BOARD
PB600
DC OUT
connector
powers all
e ects via
daisy chain
1.7 A power
adaptor
connector
DC cabling
duct
Heavy-duty
plastic
casing
Sliding locks
hold lid rmly
in place when
pedal board is
not in use
¼" TS INPUT connector
receives signal from
instrument.
¼" TS TO EFFECTS
connector sends signal
to e ects pedals
Foam padding
holds e ect
pedals in place
FROM EFFECTS
connectors receive
stereo signal from
pedals. OUTPUT TO AMP
connectors send signal
to two amps
SPECIFICATIONS
Power Supply 9 V, 1.7 A switching
adaptor(included)
Connectors ¼" TS, unbalanced
USA/Canada 120 V~, 60 Hz
GPE182-090170-1 (HSB-UL)
Europe/Australia 230 V~, 50 Hz
GPE182-090170-2 (HSB-EU)
U.K. GPE182-090170-3 (HSB-UK)
Korea 220 V~, 60 Hz
GPE182-090170-4 (HSB-SAA)
China 220 V~, 50 Hz
GPE182-090170-5 (HSB-CCC)
Japan 100 V~, 50/60 Hz
GPE182-090170-6 (HSB-JP)
Power connector 2 mm DC jack, center negative
(with daisy-chain cable included)
Power consumption 2 mA
PHYSICAL
PB1000
Dimensions 504.3 x 663.6 x 115 mm
(HxWxD) 19 / x 2 6 ⁄ x 4 ½"
PB600
Dimensions 13 x 26 ⁄ x 4 ½"
(HxWxD) 329 x 663.6 x 115 mm
PB1000
Weight approx. 11.8 lbs / 5.3 kg
including PSU & daisy chain
PB600 approx. 8.4 lbs / 3.8 kg
including PSU & daisy chain
Please note these speci cations are preliminary and conceptual in nature,
and as such are subject to change as product development progresses.
This information is supplied for market research purposes only and is not
to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon
request of the owner.