Filter
Top Products
Page 2 of 4
Internal switch-mode power
supply, noise-free audio,
superior transient response and
very low power consumption
Rack mount brackets included
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Front View
Rear View
XLR Mic
input
Carry
handle
IEC power
socket Cooling fan
¼ " TS Speaker
Output jacks
Professional
twist-lock
Speaker
Output socket
High and Low
channel EQ
Channel FX
control
Channel
Level
(volume)
FBQ Feedback
Detection
System switch
Digital FX
processor
with
100 presets
7-band
graphic
equalizer
Master
FX Level
Main volume
control with
metering
¼ " TRS Line
In jack
Input Pad
with Clip LED
Aux In RCA
jacks for Tape,
MP3, etc.
Rec Out
RCA jacks
for analog
or digital
recording
devices
¼ " TRS
Amp Insert
Aux In Level
control
Power on/o
switch
Exquisite EQ
Sometimes you may need to
ne-tune the sound of a microphone or
instrument. That’s where you’ll appreciate
PMP530M’s highly musical 2-band
channel EQ. The Low control adjusts the
amount of bass content in the signal
(±15 dB @ 80 Hz) and the High control
adjusts the amount of treble (±15 dB @
12 kHz). Simply dial in the sound you like
with these two controls. If the Clip LED
stays on too long, or if it doesn’t come on
at all, readjust the Level control. Done.
Say Goodbye to Feedback
Nothing detracts from a perfect
performance more than feedback.
You know, those high-pitched squeals
that drive both human beings and dogs
over the edge. The PMP530M comes
loaded with BEHRINGER’s amazing
FBQ Feedback Detection System,
which automatically pinpoints trouble
frequencies so you can snu them out
before you—or your audience—go deaf.
Just touch the FBQ button and watch
as all feedback-related frequencies are
indicated by red LEDs on the 7-band
graphic EQ sliders. Pull the illuminated
sliders down until the LEDs go out, and
voilà—no more feedback!
Continued on next page
EUROPOWER
PMP530M