Filter
Top Products
9 SUPER-X PRO CX2310 User Manual
4. Audio Connections
As a standard, the BEHRINGER SUPER-X PRO CX2310 is equipped with
electronically servo-balanced inputs and outputs. The circuit design features
automatic hum suppression for balanced signals and so ensures trouble-free
operation, even at the highest operating levels. Externally induced mains hum,
etc. can therefore be eectively suppressed. The automatic servo-function
recognizes the presence of unbalanced connectors and adjusts the nominal level
internally to avoid level dierences between the input and output signals
(6-dB correction).
◊ Please ensure that only qualified persons install and operate the
SUPER-X PRO. During installation and operation the user must have
sufficient electrical contact to earth. Electrostatic charges might affect
the operation of the unit.
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
12
3
1
2
3
Balanced use with XLR connectors
Fig. 4.1: Dierent plug types