Filter
Top Products
9
EURORACK
UB502/UB802/UB1002/UB1202
4. SPECIFICATIONS
4. SPECIFICATIONS
Mono inputs
Microphone inputs (IMP Invisible Mic Preamp)
Type XLR, electronically balanced,
discrete input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response <10 Hz - 150 kHz (-1 dB),
<10 Hz - 200 kHz (-3 dB)
Gain range +10 to +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted
(0 dBu In @ +22 dB gain)
Distortion (THD+N) 0.005% / 0.004% A-weighted
Line input
Type 1/4" TRS connector
electronically balanced
Impedance approx. 20 kΩ balanced
10 kΩ unbalanced
Gain range -10 to +40 dB
Max. input level 30 dBu
Fade-out attenuation
1
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader closed 89 dB
Frequency response
Microphone input to main out
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo inputs
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
EQ mono channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
EQ stereo channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux sends
Type 1/4" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Stereo aux returns
Type 1/4" TRS connector,
electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbal.
Max. input level +22 dBu
Main outputs
Type XLR, electronically balanced
Impedance approx. 240 Ω bal. / 120 Ω unbal.
Max. output level +22 dBu
Control room outputs
Type 1/4" TS connector, unbal.
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones output
Type 1/4" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main mix system data
2
Noise
Main mix @ -oo,
Channel fader -oo -106 dB / -109 dB A-weighted
Main mix @ 0 dB,
Channel fader -oo -95 dB / -98 dB A-weighted
Main Mix @ 0 dB,
Channel fader @ 0 dB -84 dB / -87 dB A-weighted
Power supply
Power consumption UB502: 13 W
UB802: 17 W
UB1002: 18 W
UB1202: 23 W
Mains voltage
USA/Canada 115 V ~, 60 Hz, MXUL5 adapter
U.K./Australia 240 V ~, 50 Hz, MXUK5 adapter
Europe 230 V ~, 50 Hz, MXEU5 adapter
Japan 100 V ~, 60 Hz, MXJP5 adapter
Dimensions
UB502
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
5 1/4" (134 mm) x 7" (177 mm)
Weight (net) approx. 0.55 kg (1.21 lbs)
UB802
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37mm) x
7 2/5" (189 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.00 kg (2.21 lbs)
UB1002
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
7 2/5" (189 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.05 kg (2.31 lbs)
UB1202
Dimensions (H x W x D) 1 5/6" / 1 1/2" (47 mm / 37 mm) x
9 1/2" (242 mm) x 8 2/3" (220 mm)
Weight (net) approx. 1.35 kg (2.97 lbs)
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all
channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far
right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a
result of these efforts, modifications may be made from time to time to existing products without
prior notice. Specifications and appearance may differ from those listed or illustrated.