Filter
Top Products
12
U-CONTROL UMX25
5. SPECIFICATIONS
2) Press the one of the two OCTAVE SHIFT buttons to which
you want to assign a controller.
3) Release the ASSIGN button.
4) Press the number keys on the keyboard to enter the controller
number of your choice (as described in chapter 4.2.1).
5) Confirm your selection with
. To discard your
assignments either press the
button or the ASSIGN
button again. In either case the ASSIGN LED goes out.
Remember to assign the OCTAVE SHIFT buttons to an individual
MIDI channel if you do not want to use the GLOBAL CHANNEL
(see chapter 4.2.2).
4.2.10 RANGE definition
The RANGE parameter can be defined for the PITCH BEND wheel
and the keyboard velocity.
a) PITCH BEND RANGE: Here you can define how moving the
PITCH BEND wheel changes the pitch. Modify the PITCH BEND
RANGE as described below:
1) Press the ASSIGN button and keep it pressed.
2) Move the PITCH BEND wheel.
3) Release the ASSIGN button.
4) Use the number keys to enter the number of half-tones by
which the pitch shall be changed when moving the pitch
bend wheel.
Examples:
- Press key 7 to define a pitch bend range of ±7 half-tones.
- Press keys 2 and 4 to define a pitch bend range of ±24 half-
tones.
5) Confirm your selection with ENTER. To discard your
assignments either press the CANCEL button or the
ASSIGN button again.
b) keyboard velocity: Here you can determine the volume of a
note depending on how fast you play a key on the keyboard. If no
changes are made, the velocity is fixed to 110.
1) Press the ASSIGN button and keep it pressed.
2) Use the number keys to enter the keyboard velocity (see
table 4.1).
3) Release the ASSIGN button.
4) Confirm your selection with . To discard your
assignments either press the button or the ASSIGN
button again.
KEY EFFECT ON KEY VEOLCITY
OFF: velocity value is fixed to 110.
Change of key pressure has no effect on
volume level.
SOFT: key pressure is very sensitive; low
velocity changes create high changes in
volume level
MEDIUM: key pressure is “normal”; (very) hard
hit notes are (very) loud, (very) soft hit notes
produce (very) low volume
HARD: key pressure is more unsusceptible
compared to all other settings
bis invalid input
Table 4.1: Effect of RANGE definition on keyboard velocity
4.2.11 The FACTORY RESET instruction
Please proceed as follows to reset all UMX25 settings to their
factory defaults:
1) Press the ASSIGN button and keep it pressed.
2a) Press both OCTAVE SHIFT buttons for a temporary
FACTORY RESET. All currently modified control elements
will be reset to their factory defaults. However, the USER
MEMORY remains as before and is not reset!
2b) Press keys , and
simultaneously for a complete FACTORY RESET: Now not
only the control elements of the FACTORY MEMORY but
also those of the USER MEMORY will be overwritten.
3) Release the ASSIGN button. The ASSIGN LED stays on.
4) Confirm your selection with . If you do not want to
RESET the unit, either press the button or the
ASSIGN button again.
BEHRINGER is constantly striving to manintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
5. SPECIFICATIONS
USB connections
Type Type B; USB1.1
MIDI connections
Type 5-pin DIN plug OUT
CONTROL ELEMENTS
Controller 1 control wheel with center reset
1 control wheel without center reset
8 rotary knobs
1 fader
Buttons 12 buttons
Keyboard 25 keys; velocity-sensitive
SWITCH PLUG
Foot pedal 1/4'' -Monojack with automatic
polarity recognition
POWER SUPPLY
USB
Battery 3 x 1,5 Volt Mignon (Typ “AA”)
Mains connection 2 mm (1/13'’) DC connection, Center
negative
9 V , 200 mA DC, regulated; extern
via:
China/Korea PSU-SB-CN BEHRINGER 220 V~, 50 Hz
Europe PSU-SB-EU BEHRINGER 230 V~, 50 Hz
Japan PSU-SB-JP BEHRINGER 100 V~, 50/60 Hz
Australia PSU-SB-SAA BEHRINGER 240 V~, 50 Hz
UK PSU-SB-UK BEHRINGER 240 V~, 50 Hz
USA PSU-SB-UL BEHRINGER 120 V~, 60 Hz
Power consumption max. 0.9 W
DIMENSIONS/WEIGHT
Dimensions (W x H x L)
215 mm x 97 mm x 495 mm
Weight 2.24 kg