Behringer VT100FX Musical Instrument Amplifier User Manual


 
Page 2 of 7
Contour control for radical midrange
sweep—from traditional to scooped
modern (VT30FX, VT50FX, VT100FX,
VT100FXH, VT250FX)
Additional Headphone and
Line output with integrated
speaker simulation
Dedicated CD input for playback of
line-level signals (e.g. CD player,
drum machine)
Dual footswitch FS112VT for Channel
selection and FX bypass included
(VT30FX, VT50FX, VT100FX,
VT100FXH, VT250FX only)
High-quality components and
exceptionally rugged construction
ensure long life
Conceived and designed by
BEHRINGER Germany
Two-Channel Operation
VIRTUBE’s Clean channel is elegant
in its simplicity. The sound is open
and uncolored and can be tailored to
your needs by Volume and the analog
passive equalizer. The Overdrive channel
features Gain, Volume, Bass, Treble and
our proprietary Contour control, with its
radical midrange sweep. All this versatility
enables you to artfully dene your
“perfect” tone, from traditional to scooped
modern and anything in-between.
Digital FX
All VIRTUBE models, with the exception
of the VT15CD, come with state-of-the-art
eects — and not some cheap-and-cheesy
reverb chip, but a full-blown 24-bit digital
eects processor with 16 great-sounding
reverbs, choruses, angers and delays.
This tasty collection of eects is a must-
have for any guitarist and includes room,
stage, concert and cathedral reverbs,
slap-back and medium echoes, two long
delays, plus slow and fast modulation
eects — all right at your ngertips.
Handmade Speakers
It takes a special speaker to
handle all this incredible technology,
tube-like tone and brutal output
power. That’s why we t each VIRTUBE
combo with handmade, heavy-duty
BUGERA Vintage Guitar speakers.
These babies were custom-designed and
handcrafted specically for the VIRTUBE
Series, and are ideally suited for classic
sound reproduction.
Get Connected
Whether you’re recording or just
jamming on your latest ri, you need the
right connections — VIRTUBE really has
you covered. The PHONES/LINE OUT B
jack is much more than just a place for
your headphones to call home. As the
name implies, this jack can also be used
to send your guitar signal, with speaker
simulation, to another amp or mixer.*
When the PHONES/ LINE OUT B jack is in
use, the internal loudspeaker is muted,
allowing you to crank your guitar into the
wee morning hours, without bothering
the neighbors.
If you’d like to play along with
previously recorded tracks, just plug
the output of your CD/Tape/mp3 deck
into the CD IN/LINE OUT A jack. This jack
also serves a second purpose, providing
yet another Line Out, this time without
speaker simulation.*
* Note: Use a standard ¼" TS cable to connect this
line-level signal to the destination device. If a hum is
detected, or the cable run is more than a few feet, you
may get better results using a Direct Injection box, like
our DI100 or DI20.
VIRTUBE
VT250FX/VT100FX
VT100FXH/VT50FX
VT30FX/VT15FX
VT15CD