Filter
Top Products
8
V-TONE GM110
4. AUDIO CONNECTIONS
The BEHRINGER V-TONE GM110 is fitted with audio inputs and
outputs in the form of 1/4" mono jacks. The exceptions to this are
the headphones output and the D.I. OUT.
Please ensure that only qualified personnel install
and operate the device.
Please make sure that all units have a proper
ground connection. For your own safety, never
remove or disable the ground conductor of the unit
or of the AC power cable. Instead, you can eliminate
hum problems caused by grounding (e.g. when
connected to a mixing console) by pressing the
GND switch (Groundlift, ).
Fig. 4.1: 1/4" TS connector (input, FX send, FX return,
speaker)
4.2: Wiring of a stereo headphones plug
Fig. 4.3: XLR connectors (D.I. Out)
4.1 Loudspeaker connection
The GM110 features a loudspeaker connection (mono jack
socket) that allows you to hook up a supplementary speaker.
Optimum adaptation of the amp to the loudspeaker is ensured
with an 4 Ω loudspeaker. With too high an impedance load, the
maximum power output will drop in proportion to the resistance
connected.
Do not use an instrument cable to connect an
external loudspeaker, rather use a special
loudspeaker cable. This will prevent any
unnecessary losses of sound and output.
5. SPECIFICATIONS
AUDIO INPUTS
Guitar input
Connector 1/4" mono jack socket
Type RF filtered input
Input impedance approx. 1 MΩ unbalanced
FX return
Connector 1/4" mono jack socket
Input impedance approx. 1 MΩ unbalanced
AUDIO OUTPUTS
FX send
Connector 1/4" mono jack socket
Type Low-impedance line level output
Output impedance approx. 100 Ω unbalanced
D.I. Out
Connector XLR
Type Balanced, low-impedance line
level output
Output impedance approx. 100 Ω
Max. output level +22 dBu
LOUDSPEAKER OUPUT
Connector 1/4" mono jack socket
Load impedance (nom.) 4 Ω
SYSTEM SPECIFICATIONS
Power amp output 30 Watts RMS into 4 Ω
LOUDSPEAKER
Type 10" Vintage loudspeaker, model
BUGERA
TM
loudspeaker
Impedance 4 Ω
Power handling 60 Watts (BUGERA
TM
)
POWER SUPPLY
Mains voltage USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 230 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 1
00 V~, 50 - 60 Hz
Power consumption 70 W maximum
Fuse 100 - 120 V~: T 2 A H 250 V
200 - 240 V~: T 1 A H 250 V
Mains connection Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 15" (381 mm) x 14 ½"
(369 mm) x 9 ½" (242 mm)
Weight approx. 12.5 kg
BEHRINGER is constantly striving to maintain the highest quality standards. Modifications
may be made to existing products without prior notice. Specifications and appearance may differ
from those listed or illustrated.
5. SPECIFICATIONS