Beyerdynamic MC 930 Microphone User Manual


 
MC 930
Condenser Microphone
APPLICATIONS
This true condenser microphone provides an enormous versatility
due to its neutral sound and accurate design. The features of the
MC 930 include the wide frequency response of 40 - 20,000 Hz
and a signal-to-noise ratio of 71 dB.
The MC 930 is suitable for miking choirs, orchestras and solo
instruments. Due to the switchable pre-attenuation of 15 dB it
provides excellent performance at high sound pressure levels. The
switchable low-cut filter with 6 dB/Octave at 250 Hz compensates for
proximity effects.
With the WS 101 wind shield the MC 930 can be used for vocal
applications.
The MC 930 is phantom powered (11 - 52 V) and therefore suitable
for live and studio applications.
Due to its cardioid polar pattern, the MC 930 has a high gain-
before-feedback and eliminates noise from the rear. It is not only a
first-class tool for studios, but also for PA systems, where excellent
sound and maximum gain-before feedback are required.
Exceptional XY stereo recordings may be achieved by using two
MC 930 microphones.
FEATURES
• Cardioid polar pattern
• Switchable pre-attenuation -15 dB
• Switchable low-cut filter at 250 Hz
• Phantom power 11 - 52 V
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 224
info@beyerdynamic.de | www.beyerdynamic.de
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2 /MC 930 (11.08)
1 of 2
VERSIONS
MC 930 Condenser microphone supplied
with MKV 9 microphone clamp
for shaft diameter
19-21 mm . . . . . . . . . . . . Order # 465.267
MC 930 Stereo-Set consisting of 2 matched
MC 930, 2 x EA 19/25
elastic suspensions,
2 x WS 53 wind shields and
rugged plastic case . . . . . Order # 471.968