Filter
Top Products
1
2
Press or until the number you want is shown
on the display
Press to dial the number
To delete records one by one
1
2
Press or until the number you want is shown on the display
Press once to delete the record
page 4 page 5 CALLER ID FUNCTIONSUSING THE ANSWERING MACHINE
Checking Caller ID records
Returning a call
Deleting Caller ID records
Up to 50 Caller ID records are stored in the Celestia 400’s memory. When the Caller ID
memories are full, new records will overwrite the oldest ones. Caller ID records are
shown on the display as described on page 1. As you check each new record, it is
added to the ‘old record’ count.
Refer to the Remote Operation card for details of how to phone in from elsewhere
and check whether you have messages.
Note that, if the answering machine is turned off, the Celestia 400 will answer calls
after 16 rings, but it will not record messages unless you turn it on using your
remote security code.
During remote operation, the Celestia 400 will pause playback and ‘beep’
after 3 minutes. Press any key within 10 seconds to continue message
playback; otherwise, your call will be cut off.
Remote operation
To set your security code for remote operation, refer to page 7.
Remember to delete messages after you have listened to them — otherwise,
the machine’s memory may become full and it will not record any more
messages. The machine will not delete new messages.
To delete a message during playback
Press once while the message is playing
Press and hold
To delete all messages
The machine will delete all old messages and give a confirmation ‘beep’.
If there are new messages, or no messages to delete, the machine will
give an error tone.
To delete all records
Press and hold
The machine will delete all old records and give a confirmation ‘beep’.
If there are no records to delete, the machine will give an error tone.
Deleting messages
Message playback
Press
If you have new messages and memos, the machine plays them. If you
have no new messages, the machine plays all messages and memos.
To pause during playback
the PLAY/PAUSE/STOP button once to start message playback
Press the PLAY/PAUSE/STOP button once
Press the PLAY/PAUSE/STOP button again
Press
Press
Press and hold the PLAY/PAUSE/STOP button
To continue playback
To skip forward to the next message
To skip back to the previous message
To stop playback
pause
stop
memo
09:45
13-10
01/11
06
AM MSG
TAM #
00-56 -5
MSG PLY
This shows the duration of playback
Press or to display the first record
Press
If you come to a record where the caller’s ID was unavailable or withheld, you
hear a ‘beep’ and the display shows ' ’ or ‘ ’.UNAVAILABLE WITHHELD
or to scroll through the list of records
11:05 13-10
02/05
AM MSG
0208344
16
CALL #
Guarantee and service
The Binatone Celestia 400 is guaranteed for 12 months from the date of purchase shown on your
sales receipt. The Guarantee does not cover damage by misuse or negligence, or by excessive
voltages —for example, faults on the telephone line, or lightning.
Disconnect the plugs from the mains and the telephone line, then pack up your Celestia 400, using
the original packaging. Return the unit to the shop where you bought it,
.
In the unlikely event that you need to return your Celestia 400 to our Repair Centre while it is under
guarantee, there will be a £5 handling charge.
Disconnect and pack up your Celestia 400 as above. Call our Service Department on
and ask for details of the repair charge and the address to send the unit.
Return your Celestia 400 to the address given, remembering to include your name and address,
plus a cheque or postal order for the value of the repair charge.
While the unit is under Guarantee
Repair after the Guarantee has expired
making sure you take
your sales receipt as proof of purchase
01325 304473