Filter
Top Products
50 Spring Street,Ramsey,NJ 07446,U.S.A.
201-934-8500;Fax:201-934-9832
E-mail:info@bogen.com / Web Site:www.bogen.com
LIMITED WARRANTY
Bogen microphones are warranted to be free from defects in mate-
rial or workmanship provided that the product has not been sub-
jected to abuse or accident or altered in any way for one (1) year
from the date of sale to the original purchaser. Any part of the
product covered by this warranty that,with normal installation and
use,becomes defective will be repaired or replaced by Bogen,at our
option, provided the product is shipped insured and prepaid to:
Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ
07446, USA.The product will be returned to you freight prepaid.
This warranty does not extend to any of our products that have
been subjected to misuse, improper storage, neglect, accident,
improper installation or have been modified or repaired in any man-
ner that Bogen believes may affect the reliability of the product,or
where the serial number or date code has been removed or
defaced.
THE FOREGOING LIMITED WARRANTY IS BOGEN'S SOLE
AND EXCLUSIVE WARRANTY AND THE PURCHASER'S SOLE
AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WAR-
RANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,AND
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED
AND EXCLUDED.Bogen's liability arising out of the manufacture,
sale or supplying of products or their use or disposition,whether
based upon warranty,contract,tort or otherwise,shall be limited to
the price of the product.In no event shall Bogen be liable for spe-
cial,incidental or consequential damages (including,but not limited
to,loss of profits,loss of data or loss of use damages) arising out of
the manufacture, sale or supplying of products, even if Bogen has
been advised of the possibility of such damages or losses.
Products that are out of warranty will also be repaired by the Bogen
Factory Service Department -- same address as above or call 201-
934-8500. The parts and labor involved in these repairs are war-
ranted for 90 days when repaired by the Bogen Factory Service
Department. All shipping charges in addition to parts and labor
charges will be at the owner's expense.
SELECTORS AND SWITCHES
CABLE END CONNECTIONS
HI IMPEDANCE: Connect the red lead to an unbalanced mic input,the black lead and shield to
ground,and the white and green to external equipment (if applicable).
LO IMPEDANCE: Connect cable leads, red and black, to a balanced mic input; shield to
ground; and white and green to external equipment (if applicable)
PHASING
Positive pressure (movement of diaphragm inward) will generate a positive voltage on the red cable
lead with respect to the black lead.
CABLE CONNECTIONS
LEAD COLOR FUNCTION
RED MIC (+)
BLACK MIC (-)
SHIELD GROUND
GREEN SWITCH (N.O.)
WHITE SWITCH (COM)
MBS1000A Bottom View
FREQUENCY RESPONSE GRAPH