Filter
Top Products
Connections
Mute Control
Each priority bus (High, Medium, and Low) can be externally activated.
This allows priority buses of two or more Power Vector mixers to be
linked together for system expansion purposes.A particular mute prior-
ity can be externally forced by shorting that priority's bus terminal to
the C terminal of the Mute Control (the C terminal is the system
ground).Forcing the H priority bus this way will mute all modules except
for modules set for priority level 1 (highest priority). Forcing the M pri-
ority bus will mute modules set for priority levels 3 or 4, but not levels
1 or 2, and forcing the L priority bus will only mute modules set at pri-
ority level 4.
System Expansion of Power Vector Mixers
By interconnecting the Bridging Connectors and Mute Control lines, it is
possible to connect two or more Power Vector Mixers. It is not recom-
mended that more than three mixers be bridged together due to bridg-
ing loss.When making mute control connections, make certain that the
wiring is consistent (H to H, M to M, L to L, and C to C).
7
Power Vector Mixer #1
Power Vector Mixer #2
Power Vector Mixer #3