Filter
Top Products
27
Other Functions
Using Footswitch Pedals
With an optional footswitch pedal (such as the BOSS FS-5U or FS-6) connected to the ME-20,
you can use the footswitch for the following operations.
In Manual mode:
Switches the OD/DS SOLO on/off.
Switches the Bypass/Tuner on/off.
In Memory mode:
Bank up, Bank down
To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume and turn off the power to all devices before making any
connections.
Disconnecting or connecting plugs during startup may switch OD/DS SOLO or
Tuner on or off.
Connecting a Footswitch Pedal
When Connecting an FS-5U
fig.FS-5U1-e.eps_80/fig.FS-5U2-e.eps_80/fig.FS-6-e.eps_80
If using an FS-5U switch, set
the POLARITY switch as
shown in the following.
OD/DS SOLO
On/Off
Bank up
ME-20_e.book 27 ページ ２００７年９月１０日 月曜日 午後６時２２分