Filter
Top Products
PA310 PresentationPro
™
Owner’s Manual
2
Visit us online at califone.com
Recommended Set-up Procedure
Ideally volume on the unit should be set at maximum before the microphone volume is adjusted to the desired level.
Turn on the main power switch and use either a wireless microphone or cabled microphone to adjust the volume.
Operating The Sound System
• Place the PresentationPro at its desired location.
• CAUTION: Assure the 120/240 switch is in the correct position.
• Plug the power cord into a grounded 120 volt, 60 Hz outlet.
• Connect and audio source. Plug a microphone into either the XLR MIC input jack or the ¼” phone mic input or a wireless
Califone microphone. An audio source can be plugged into the AUX or LINE IN jacks.
• Turn the power switch “ON” (the red LED on the rear panel should light).
• Adjust volume (press the Vol+/Vol- on the rear panel or keys on PI-RC remote control), bass/treble controls for desired sound.
• Point the remote control at the speaker grill).
continued on page 3