Casio AT-3 Electronic Keyboard User Manual


 
Using the Pattern Sequencer
E-114
This procedure copies note events only.
You will not be able to perform this procedure if an
INTRO or ENDING is selected as the accompaniment
pattern.
When a percussion part or drum part is specified as the
copy destination instrument part, you can specify a
percussion part or drum part as the copy source. When
a bass part or a chord part (chord 1 through chord 5) is
specified as the copy destination, you can specify a
bass part or a chord part (chord 1 through chord 5) as
the copy source. No other part combinations are
allowed.
1.
While the pattern sequencer screen is
displayed, use the L-14 (NORMAL/FILL-IN) or
L-15 (VARIATION/FILL-IN) button to select an
accompaniment pattern, and the R-17 (u, i)
buttons to select an instrument part.
The rec area of the accompaniment pattern/instrument
part included in the accompaniment pattern is the copy
destinations.
2.
While holding down the R-13 (FUNCTION)
button, press the C-4 (EDIT) button to display
the edit menu.
3.
Use the R-17 (t, y) buttons to move the 0 to
“PartEdit” and then press the R-16 (ENTER)
button.
This displays the “Part Edit” screen.
4.
Use the R-17 (y) button to move the 0 to
“Copy” and then press the R-16 (ENTER)
button.
This displays the “Part Copy” screen.
5.
Specify a rhythm number, accompaniment
pattern, and instrument part as the copy
destination.
Use the R-17 (t, y, u, i) buttons to select one of
the items described in the table below and then use the
dial or R-14 (–, +) buttons to change the setting.
6.
After the settings are the way you want, press
the R-16 (ENTER) button.
7.
In response to the “Sure?” message that
appears, press the R-14 (YES) button to copy or
the R-14 (NO) button to cancel.
The copied instrument part status will become
“Recorded Data”.
To copy preset or user rhythm instrument
part data to a rec area
1
32
Display: Item name Setting Range
1
Copy source rhythm
number
A:001 to F:100
2
Copy source
accompaniment
pattern
normal (NORMAL),
nrmFil (NORMAL FILL-IN),
Variat (VARIATION),
VarFil (VARIATION FILL-IN)
3
Copy source part Percus (Percussion),
Drum (Drums), Bass (Bass),
Chord1 to Chord5 (Chord 1 to
Chord 5)