Filter
Top Products
E-15
[Connection Example]
❚
NOTE
• You can also connect the keyboard’s MIDI terminal to a com-
puter or sequencer. See “MIDI” on page E-31 for details.
LEFT
RIGHT
AUX IN or similar terminal
of audio amplifier
White
Red
PIN plug
Stereo standard
plug
PHONES/OUTPUT Terminal
Keyboard amp,
guitar amp,etc.
1
2
3
Audio connection
Connections
Phones/Output Terminal
Before connecting phones or other external equipment, be
sure to first turn down the volume settings of the keyboard
and the connected equipment. You can then adjust volume
to the desired level after connections are complete.
[Rear Panel]
Connecting Phones (Figure 1)
Connecting phones cuts off output from the keyboard’s built-
in speakers, so you can play even late at night without dis-
turbing anyone.
Audio Equipment (Figure 2)
Connect the keyboard to a audio equipment using a com-
mercially available connecting cord with a standard plug on
one end and two PIN plugs on the other end. Note that the
standard plug you connect to the keyboard must be a stereo
plug, otherwise you will be able to output only one of stereo
channels. In this configuration, you normally set the input
selector of the audio equipment to the terminal (usually
marked AUX IN or something similar) where the cord from
the keyboard is connected. See the user documentation that
comes with your audio equipment for full details.
Musical Instrument Amplifier (Figure 3)
Use a commercially available connecting cord* to connect the
keyboard to a musical instrument amplifier.
* Be sure to use a connecting cord that has a stereo standard
plug on the end you connect to the keyboard, and a con-
nector that provides dual channel (left and right) input to
the amplifier to which you are connecting. The wrong type
of connector at either end can cause one of the stereo chan-
nels to be lost.
When connected to a musical instrument amplifier, set the
volume of the keyboard to a relatively low level and make
output volume adjustments using the amplifier’s controls.
INPUT 1
INPUT 2
PIN jack
PIN plug (red)
PIN plug (white)
Stereo standard plug
Keyboard or
guitar amp
To keyboard’s
PHONES/OUTPUT
terminal
Standard plug
625A-E-017A
Sustain jack Terminal
You can connect an optional sustain pedal (SP-2, SP-10, or
SP-20) to the SUSTAIN jack terminal to enable the capabili-
ties described below.
Sustain Pedal
• With piano tones, depressing the pedal causes notes to lin-
ger, much like a piano’s damper pedal.
• With organ tones, depressing the pedal causes notes to con-
tinue to sound until the pedal is released.
Accessories and Options
Use only the accessories and options specified for this key-
board. Use of non-authorized items creates the danger of fire,
electrical shock, and personal injury.
SUSTAIN jack Terminal
SP-20
02.8.26, 17:30Page 15