Filter
Top Products
E-9
Playing with Different Tones
404A-E-011B
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
Sostenuto
Soft
Selecting the Pedal Function
A pedal connected to the piano’s PEDAL jack can
operate as either a soft pedal or a sostenuto pedal.
When you turn on the digital piano, the pedal is
initially configured for soft pedal operation. You can
perform the following operation to select either soft
or sostenuto for the pedal operation.
1
While holding down the FUNCTION
button, use the keyboard keys shown below
to select either soft or sostenuto.
Adjusting the Effect Applied when the
Damper Pedal is Pressed Half Way
(With optional SP-30 only)
You can specify to what extent the damper effect
should be applied when you press the damper pedal
half way. A setting in the range of 0 (no effect) to 42
(same effect as full press) can be specified.
1
While holding down the FUNCTION
button, press one of the keyboard keys
shown below to specify the setting you
want.
̄ : Decreases the effect
̆ : Increases the effect
• To return the volume setting to its initial default,
hold down the FUNCTION button and press
both of the keys at the same time.
▲
▲
▲
C1
▲
C2
▲
C3
▲
C4
▲
C5
▲
C6
▲
C7
▲
C8
Using the Built-in Metronome
You can use the metronome to sound a count that helps
keep you in proper time.
NOTE
• If you want to use layer/split in combination with
the metronome, first press the RHYTHM button so
the rhythm lamp (under the button) is lit.
1
Press the METRONOME button.
• This starts the metronome.
2
While holding down the FUNCTION
button, use the keyboard keys shown below
to specify how many beats there are per
measure.
• The first value of the beat can be set to a value
of 2 through 6. The bell (indicating the first beat
of a measure) does not sound while a value of 0
is specified. All beats are indicated by a click
sound. This setting lets you practice with a
steady beat, without worrying about how many
beats there are in each measure.
3
While holding down the FUNCTION
button, use the TEMPO [
] and [ ]
buttons to change the tempo (speed) of the
metronome.
• You can also use keyboard keys to change the
tempo setting (see page E-10).
4
Press the METRONOME button again to
stop the metronome.
Increases the
tempo value
Decreases the
tempo value