Casio PX-7 Electronic Keyboard User Manual


 
E-10
Playing with Different Tones
1.
Press the METRONOME button.
This starts the metronome.
The lamp above the SONG a button flash in time
with the metronome beat.
2.
To change the beat, hold down the
FUNCTION button as you press one of the
METRONOME BEAT keys to select a beat
setting.
You can specify beats per measure value of 0, 2, 3, 4,
5, or 6. Specifying 0 as the setting plays a straight
click, without any chime. This setting lets you
practice with a steady beat.
3.
While holding down the FUNCTION button,
use the TEMPO keys to specify a tempo
value in the range of 20 to 255 beats per
minute.
Each press of the + or – key raises or lowers the
tempo value by 1.
You can use the value input keys (0 to 9) to enter a
specific three-digit. Be sure to input all three digits.
Example:To enter “96”, press keys 0, 9, 6.
4.
Press the METRONOME button or SONG
a button to turn off the metronome.
NOTE
• To return the tempo setting to the default tempo of
the currently selected Music Library tune, press the
+ and – keys at the same time in step 3. Pressing +
and – while recording will return the tempo value to
120.
To adjust the metronome volume
NOTE
• You can perform the following procedure at any
time, regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the METRONOME VOLUME keys to
specify a volume value in the range of 0 to 42.
For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-19.
Each press of the or key raises or lowers the
metronome volume value by 1.
NOTE
• To return to the initial default setting, press and
at the same time.
Using the Metronome