Filter
Top Products
Reference
EN-59
English
A tone’s quality and volume
sounds slightly different
depending where it is
played on the keyboard.
This is an unavoidable result of the digital sampling process,
*
and does not indicate
malfunction.
* Multiple digital samples are taken for the low range, middle range, and high range of the
original musical instrument. Because of this, there may be very slight differences in tonal
quality and volume between sample ranges.
When I press a button, the
note that is sounding cuts
out momentarily or there is
a slight change in how
effects are applied.
This happens when the sounds of multiple parts are sounding at the same time while using
layer, using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when
one of these conditions exists will cause the effect setting that is built into the tone to change
automatically, which causes notes to cut out momentarily or causes a slight change in how
effects are being applied.
There are knots, saw blade
marks, and/or other marks
on the finish of the Digital
Piano.
The finish of the Digital Piano has been designed to faithfully reproduce the appearance of
natural wood, including cuts and other marks in the wood. Though knots, saw blade marks,
and/or other marks may be visible on the finish, they are not actual cracks or scratches. Such
marks will not cause any problems with the use of your Digital Piano.
Problem Cause Action
See
Page
PX860-ES-1A.indd 61 2014/06/27 12:26:18