Filter
Top Products
E-61
Song Memory Function
To correct mistakes while step
recording
1
Without exiting step recording, use the [̇]
CURSOR button to move the input point to the left.
• The REC indicator disappears from the display, and
the STEP indicator flashes.
2
Monitoring the data on the display, use [̇] and
[̈] CURSOR buttons to move the input point to
the data you want to change.
Example: To re-record all note data following the note
A3 located at Measure 120, Beat 1, Clock 0.
3
Press the [̄] CURSOR button.
No t e C#4
••••••• •••••••
••••••• •••••••
C 4
C 4
Measure 126/Beat 3/Clock 48
(Normal input point)
Measure 126/Beat 3/Clock 0
(Previous data)
Use [̇] and [̈] CURSOR
to move left and ri
g
ht.
Press [̇] CURSOR button.
Data flowData flow
No t e A3
••••••• •••••••
C 4A3
Measure 120/Beat 1/Clock 0
(Input point moved to using [̇] and [̈]
CURSOR buttons
)
Data flow
738A-E-063A
Rewr i t e ?
4
Press the YES button.
• This deletes all data from the location you specified
and enters step record standby.
• Pressing the [̆] CURSOR button or the NO button
cancels deleting the data.
NOTE
• When you reach the end of the recording by pressing
the [̈] CURSOR button, the “REC” indicator appears
and the “STEP” indicator flashes on the display,
indicating that you can add more data using step
recording.
To delete specific note data
1
Perform steps 1 and 2 under “To correct mistakes
while step recording” above to display the note you
want to delete.
2
Press the [̄] CURSOR button twice.
3
In response to the “Delete?” message that appears
on the screen, press the YES button to delete the
displayed note.
•••••••
Measure 120/Beat 1/Clock 0
(
Step re-recording begins from here.
)
Data flow
All data to
the right
is deleted.
WK3200_e_53-64.p65 05.3.15, 6:17 PM61