Filter
Top Products
CH-258 User Manual 6 2006-05-04/23:59
OPERATING INSTRUCTIONS
The Cyborg™ is a high output sound activated effect light. It produces an old favored mushroom like
light movement but uses a new high polished aluminum reflector for a unique and brilliant beam
pattern.
The Cyborg™ is equipped with an internal microphone and a sound sensitivity knob. The user can
adjust the sensitivity of the microphone for obtaining optimum sound activated response of its
movement.
Whether used in a mobile or permanent environment, you may find it useful to control this effect by
means of a relay system for remote switching or to go with DMX control, use the latest in DMX
compatible (Dimmer Relay Pack), all available from CHAUVET.
A relay system will allow you to remotely trigger the Cyborg™ and any other non-dimmable effect
light from a switch panel. Make sure to use a cable of at least 25 feet to provide ample distance
between the control panel and the switch pack for most mobile lighting applications.
If you would prefer to control it directly from your DMX lighting console then we suggest a DMX
compatible (relay switch-pack). These devices are an extremely affordable solution to operating non-
DMX lighting effects remotely.
Duty Cycle
It is necessary to cycle On and Off this fixture every 15 minutes due to the high temperature created
while in use. For every 15 minute period that the fixture is used, allow 15 minutes in the Off position to
cool down. Please do not exceed 15 minutes of On operation per cycle.
To learn more about these and other CHAUVET products visit us at www.chauvetlighting.com.