Filter
Top Products
Q-Scan 250 & Q-Roll 250 User Manual 12 2005-11-15/13:24
User Configurations
P1 - Pan Invert / P2- Tilt Invert
It is possible to invert the pan and tilt mirror movement from within the fixture itself. This could be
helpful in situations where the positioning or rigging of a fixture led to a reverse orientation of the
fixture in relation to all or most other fixtures installed. When choosing to command the pan or tilt of
all fixtures at the same time you will notice that the fixtures whose orientation is different from the
others will most likely move opposite of the rest. You can apply a pan and tilt Invert by following the
settings in the table below.
FUNCTION SET TO NOTES
P1 -y Pan Invert
P2 -y Tilt Invert
P1 & P2 -n Return to normal
Segment Display Configurations
The display can be inverted making it easier to read the menu depending on the orientation of your
fixture.
P8 - Display Invert
FUNCTION SET TO NOTES
P8 -y Invert display
P8 -n Return to normal
Service Functions
P3 - Fixture Reset (all motors)
This function will re-initialize the fixture by returning all motors to its startup positions or otherwise
known as (home position).
FUNCTION SET TO NOTES
P3 -y Reset fixture
P3 -n Skip function