Filter
Top Products
INSTALLATION INSTRUCTIONS
for SX022270 SX-S Extension Module
FOUR CHANNEL MATRIX MODULE
ADDITIONAL AUX MODULE
INPUT MONITORING MODULE(SX
-V only)
BALANCED TRANSFORMER OUTPUT MODULE
SONOSAX SX
-V
TIPS ON USING YOUR MIXER
1. PREPARATION
1.1 Opening the cover
Release the 2 slide-locks and simultaneously slide out the cover.
1.2 Closing the cover
Replace the cover and slide all the way in until the locks catch.
1.3 Removing the battery compartment
Make sure that the handle is in rest position. Remove the battery pack by releasing the 2 slide-locks, tilting the
compartment diagonally towards you and lifting it out over the handle.
IMPORTANT:
Keep the slide-locks pressed towards the center untill the battery compartment is completely lifted
out of the mixer.
1.4 Opening the battery compartment
The battery compartment may now be opened by loosening the screw on the left. Remove the plastic side cover.
Insert:
{
8 alkaline D-cells or 8 rechargeable nickel-cadmium batteries for the SX-S6
{
10 alkaline D-cells or 10 rechargeable nickel-cadmium batteries for the SX-8 or SX-S10.
NOTE:
On the left of the battery compartment, you will find the hex wrench (2mm) which will enable you to
completely disassemble the SX-S without using any other tool.
WARNING :
Never leave discharged batteries in your SX-S. Make sure before charging that your SX-S only
contains rechargeable NiCd batteries. To ensure optimal autonomy, use only professional alkaline D-cells. Also
check the manufacture date of D-cells.
Seite 2 von 22SONOSAX SX/S USER MANUAL
26.08.2004file://D:\Z
_
Librar
y
\Webco
py
\sonosax\SXS\sxsume.html