Filter
Top Products
Profiler Model 5 Compact Stereo Guitar Amplifier with DSP
6
11. BATTERY COMPARTMENT: Remove
the cover to the battery compartment by
pressing the clip on the right-hand side of
the cover and pulling it out
. Install six “AA”
alkaline batteries, making sure to orient them
correctly as indicated by the markings inside.
Reinstall the cover and you’re ready to go!
12. POWER IN: This is where you connect
the AC adapter to provide power to the
Profiler Model 5 whenever AC power is avail-
able to prolong the life of the batteries.
Note: When the AC adapter is connected,
power is automatically drawn from the AC
adapter and not from the batteries.
13. HEADPHONES: Use this 1/8" stereo
mini jack to connect headphones to the
Profiler Model 5 and monitor the stereo sig-
nal that is playing in the two speakers. The
internal speakers are disconnected when
headphones are used.
Note: Depending on your headphones, you
may need to use a stereo 1/8" plug to 1/4"
jack headphone adapter, available at most
electronic stores.
14. AUDIO INPUT: Use this 1/8" stereo
mini jack to connect the output from a CD
player, MP3 player, laptop, etc., to the ampli-
fier. The stereo signal at the Audio Input is
summed with the left and right signals in the
amplifier just before the USB output and the
Master volume control. This allows you to
play along with your favorite music. Use the
output level control for the signal source to
adjust the signal for the proper mix with your
guitar.
Note: Depending on your CD player or
other signal source, you may need to use an
adapter (i.e., two phono jacks to 1/8" stereo
plug), available at most electronic stores.
15. USB: The USB (Universal Serial Bus)
connector allows you to connect the Profiler
Model 5 to a computer so you can record
your guitar directly to Tracktion (or another
DAW application). Use a standard USB cable
(not supplied) to make this connection.
USB
AUDIO
AUDIO
INPUT
INPUT
DESIGNED IN ST. LOUIS, MO, USA. MANUFACTURED IN CHINA. FABRIQUE EN CHINE
© 2006 LOUD TECHNOLOGIES INC.
“CRATE” IS A REGISTERED TRADEMARK OF LOUD TECHNOLOGIES INC.
USC
3031613
MANUFACTURING DATE
SERIAL NUMBER
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVI S:
RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
9VDC 500mA
9VDC 500mA
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND
ICES-003, FOR CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
11
12 13 14 15
The Rear Panel