Filter
Top Products
The Digital Signal Processor:
Crate’s Digital Signal Processing offers 16 exciting digital effects, accessible through the DSP
Mode control. The effects are described below.
3
Channel T
racking:
Your Crate GLX amplifier gives you the power of Channel Tracking! Once you select a DSP set-
ting for each channel, Channel Tracking recalls those DSP settings automatically – without chang-
ing the DSP controls! For example:
• Select the Clean channel. Set the DSP Mode to “8”
(slow deep flange w/reverb)
• Select the Overdrive channel, Gain 1. Set the DSP Mode to “10” (slow tremolo chorus w/reverb)
(the setting for the Clean channel is now saved to memory)
• Select the Overdrive channel, Gain 2. Set the DSP Mode to “14” (touch wah)
(the setting for the Overdrive channel, Gain 1 is now saved to memory)
• Reselect the Clean channel
(the setting for the Overdrive channel, Gain 2 is now saved to memory)
Now when you go back to the Clean channel, even though the DSP Mode was last set to Touch
Wah, Channel Tracking automatically recalls the last setting for the Clean channel – in this exam-
ple, Slow Deep Flange with Reverb. Change to the Overdrive channel, Gain 1, and Slow Tremolo
Chorus with Reverb is recalled. Change to the Overdrive channel, Gain 2, and Touch Wah is
recalled. That’s the power of Channel Tracking!
(Note: Even when the power is turned off, Channel Tracking still retains the settings – until you change them!)
GLX65/120/212
Guitar Amplifier with
DSP
& ChannelTracking
Use the DSP Mode control to access
any of the 16 built-in digital effects.
Use the Level control to mix in the
desired amount of each effect.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
small room reverb
medium room reverb
large room reverb
concert hall reverb
short slapback w/small room reverb
medium delay w/plate reverb
long delay w/large room reverb
slow deep flange w/reverb
flange w/reverb & delay
slow tremolo chorus w/reverb
chorus w/reverb & delay
rotating speaker
octave divider
touch wah
inverse wah
doubler