Filter
Top Products
GTD120/212 Guitar Amplifier w/DSP and Channel Tracking
7
19. REVERB: Use this control to adjust
the amount of digital reverb effect. In its
fully counterclockwise position, the signal
will be “dry” (without reverb). As you rotate
this control clockwise, the amount of reverb
increases.
20. CHORUS: Use this control to select the
type of digital chorus effect. In its fully coun-
terclockwise position, the signal will be “dry”
(without chorus). As you rotate the control
clockwise, you can select from three chorus
The DSP Section
settings, three flanger settings, or three
phaser settings. The chart below describes
these effects.
21. DELAY: Use this control to select
the type of digital delay effect. In its fully
counterclockwise position, the signal will
be “dry” (without chorus). As you rotate the
control clockwise, you can select from three
slap settings, three echo settings, or three
echo with effect settings. The chart below
describes these effects.
Effect Setting Description
Chorus 1 Chorus with low depth
Chorus 2 Chorus with medium depth
Chorus 3 Chorus with high depth
Flanger 1 Flanger with low depth
Flanger 2 Flanger with medium depth
Flanger 3 Flanger with high depth
Phaser 1 Phaser with low feedback
Phaser 2 Phaser with medium feedback
Phaser 3 Phaser with high feedback
Slap 1 Single delay with low level
Slap 2 Single delay with medium level
Slap 3 Single delay with high level
Echo 1 Echo with low level
Echo 2 Echo with medium level
Echo 3 Echo with high level
Echo/Eff 1 Echo with low level before effect
Echo/Eff 2 Echo with medium level before effect
Echo/Eff 3 Echo with high level before effect
Normal Signal Path
Chorus > Delay > Reverb
Echo/Eff Signal Path
Delay > Chorus > Reverb
19 20 21