Filter
Top Products
Bass Amplifier
The Front Panel:
4
1: INPUT: Use this 1/4” jack to connect your guitar to the amplifier by
means of a shielded instrument cable.
2: LEVEL: Use this control to adjust the overall output of the amplifier.
3: LOW: Use this control to adjust the bass response of the amplifier.
Rotating the control counterclockwise reduces the low frequency output.
Rotating the control clockwise increases the low frequency output. It may
be necessary to reduce the Low control at higher volume levels.
4: MID: Use this control to adjust the midrange response of the amplifier.
Rotating the control counterclockwise reduces the midrange frequency
output. Rotating the control clockwise increases the midrange frequency
output.
5: HIGH: Use this control to adjust the high frequency response of the
amplifier. Rotating the control counterclockwise reduces the high fre-
quency output. Rotating the control clockwise increases the high fre-
quency output.
6: SPEAKER: Use this jack to connect the amplifier to an external speak-
er. The internal speaker is disconnected when this jack is used. The
impedance of the external speaker must be 4 ohms or greater.
WARNING: Do not attempt to use headphones in the Speaker jack!
Permanent hearing damage could result!