Filter
Top Products
DN-X900
GENERAL
Dimensions 19.0 (W) x 4.4 (H) x 6.9 (D) inch
482 (W) x 112.5 (H) x 177 (D) mm
Weight 5.9 kg, 13 lbs.
Power Supply AC120 V ±10%, 60 Hz
Power Consumption 33 W
AUDIO SECTION
Input Level and Impedance
8-Line -14 dBV (200 mV) 50kΩ/kohms
3-Phono -50 dBV (3.0 mV) 50 kΩ/kohms
Effect (Return) -14 dBV (200 mV) 50 kΩ/kohms
Main Mic -54 dBV (2.0 mV) 10 kΩ/kohms
Aux Mic -60 dBV (1.0 mV) 10 kΩ/kohms
Output Level and Impedance
Balanced 4 dBm (1.23 V) 600 Ω/ohms
Unbalanced 0 dBV (1.0V) 1 kΩ/kohms
Booth/Zone (Balanced) 4 dBm (1.23 V) 600 Ω/ohms load
Rec (RCA) -10 dBV (316 mV) 1 kΩ/kohms
Effect (Send) -14 dBV (200 mV) 1 kΩ/kohms
Subwoofer/Lighiting 2 dBm (975 mV) 600 Ω/ohms
Headphone 0 dBV (1.0 V) 32 Ω/ohms
Frequency Response
Line 20 to 20 kHz ±2 dB
Phono 20 to 20 kHz RIAA ±2 dB
Mic 20 to 20 kHz ±2 dB
Signal to Noise Ratio
Line 82 dB (0 dBm, 1 kHz, EQ flat)
Phono 75dB (0 dBm, 1 kHz, EQ flat)
Main Mic 65 dB (0 dBm, 1 kHz, EQ flat)
Total Harmonic Distortion Rate
Line Below 0.05%
Phono Below 0.05%
Cross Talk Over 70 dB
Channel Equalizer
Hi +10 dB, -35 dB (16 kHz)
Mid +10 dB, -35 dB (1 kHz)
Low +6 dB, -35 dB (60 Hz)
Microphone Equalizer
Hi +12 dB, -12 dB (10 kHz)
Mid +12 dB, -12 dB (1 kHz)
Low +12 dB, -12 dB (100 Hz)
Digital Output (COAXIAL/TOSLINK)
Signal Format IEC958 Type II
Output Level 0.5 Vp-p 75 Ω/ohms
Output Signal Level -6 dB
Digital Input (COAXIAL)
SPDIF 32-48kHz 16,20bit
Input Level 0.5 Vp-p 75 Ω/ohms
OTHER FEATURES continued
Fader Start (5V pulse) Cross Fader and Channel Fader-Start Trigger is
compatible with all Denon DJ CD/MP3 players.
Compact 4U Rack Space with Recessed Rear Terminals
Independent 3-band Main and Aux Mic EQ
Mic Talkover Function with Sensitivity Adjustment
Independent CUE System (all channels)
Split / Cue Headphone Monitor with PFL Metering
Master Output -10dB Attenuation Switch
Master Output Stereo/Mono Switch
Zone Output with Volume Adjust
Record Out – RCA/Unbalanced
2 Digital Outputs – Toslink/SPDIF
Subwoofer/Lighting Output with Frequency Adjust
Ideal for powered
speakers, powered amp or even a signal feed for lighting systems.
Gold Plated RCA Connectors
Optional Rotary Knob Kit (Model: ACD-46) A DJ or club owner can easily
swap out any channel fader (1 to 4) and replace them with our optional ACD-46
rotary knob kits, making the DN-X500 appealing to both fader and knob style
DJs. With its powerful matrix routing option, it doesn’t matter where they get
installed
(see fig.1)
SPECIFICATIONS
DENON DJ USA
1100 Maplewood Drive
Itasca, Illinos 60143
T: 630.741.0330
F: 630.741.0652
DENON DJ CANADA
5-505 Apple Creek Blvd
Markham On L3R5B1
T: 905.475.4085
F: 905.475.4159
© 2008 D&M Professional.
All Rights reserved.
Figure 1
ACD-46 Option