Filter
Top Products
5
Input 2 - Connect a second input to this jack for stereo operation.
Inputs 1 and 2 are processed separately through the stereo chorus
effect and then fed to Outputs 1 and 2 keeping true stereo separa-
tion between channels.
Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 9 for informa-
tion on accessing and changing the battery.
Indicator LED - Lights when the effect is turned on. When bat-
tery power is low (approximately 15 minutes before it dies), the
Indicator LED begins to dim giving you advanced warning that very
shortly you will need to replace the battery.
Foot Switch - Turns the effect on and off.
Output 1 (Mono) - Connect this output to the input of a single
guitar amplifier, another pedal input, or an amp effects return.
7.
8.
9.
10.
11.