Filter
Top Products
The Power and the Beauty !
pro-mixing
The discrete microphone preamps
of the PowerMate 1000 and
PowerMate 1600 combine out-
standing audio quality with extremely
low noise and distortion, setting
new standards in professional mix-
ing technology. Ergonomically
designed gain controls with a range
of 60 dB, group-switchable phan-
tom power, vocal voicing filters, 3-
band EQ with semiparametric mids,
four aux sends, PFL, Mute, dust-
proof ALPS faders, 2 x 7-band
graphic EQs, feedback filters and
four stereo channels are just some
of the other professional features.
pro-power
The integrated high-efficiency Class
H power amplifiers deliver an im-
pressive 2 x 700 watts into 4 ohms
and an absolutely safe 2 x 870 watts
into 2.66 ohms with comparatively
little heat build-up. All the protective
circuits with which the Dynacord
19” amplfiers are equipped are
present here, including protections
against overheating, short-circuits
and DC voltage and HF and back
EMF protection. The flow of current
at power up is limited and there is a
short delay before power is
switched to the loudspeaker out-
puts. An LPN filter and a super-fast
dynamic audio limiter are further
Dynacord-typical features.
pro-effects
Two parallel and individually con-
trolled 24-bit stereo digital effects
devices with 48-bit algorithms offer a
total of 2 x 99 live-optimised presets
in studio quality. User-friendly
Up/Down keys are used to select
between room reverb, plate reverb,
echo reverb, chorus reverb,
mono/stereo delay, modulated delay
effects (like chorus and flanger) and
a large number of other special
effects. Your preferred starting pre-
sets can be stored in program mode
so as to be instantly available next
time you switch on the device. The
effects returns can be switched into
or out of the signal path using either
one footswitch for both of the inte-
grated effects devices or a separate
footswitch for each.