Dynacord PowerMate 600 DJ Equipment User Manual


  Open as PDF
of 4
 
SPECIFICATIONS
Technical Specications PowerMate600 Mixing desk in rated condition, Unity Gain (MIC Gain 20 dB), all faders
position 0 dB,
all pots in mid position, master fader + 6dB, amplier rated output power into 8 Ohms, dual channel, unless
otherwise specied.
Maximum Midband Output Power, 1 kHz, THD=1%, Dual Channel
into 4 Ohms 2 x 270 W
into 8 Ohms 2 x 180 W
Rated Output Power, THD=0.1%, Single Channel
into 4 Ohms 2 x 300 W
into 8 Ohms 2 x 150 W
Maximum Midband Output Power, 1 kHz, THD=1%, Single Channel
into 4 Ohms 2 x 340 W
into 8 Ohms 2 x 200 W
Maximum Output Voltage of power amplier, no load 43 Vrms
THD at 1kHz, MBW=80kHz
MIC input to Main L/R output, +16 dBu, typical < 0.006%
Power amplier input to Speaker L/R output < 0.08%
DIM 30, power amplier < 0.03%
IMD-SMPTE, power amplier, 60Hz, 7 kHz < 0.2%
Frequency Response, -3dB ref. 1kHz
Any input to any Mixer output 15Hz ... 60kHz
Any input to Speaker L/R output 30Hz ... 40kHz
Crosstalk, 1kHz
Fader and AUX-Send attenuation > 80 dB
Channel to channel > 70 dB
CMRR, MIC input, 1kHz > 80 dB
Input Sensitivity, all level controls in max. position
MIC input -74 dBu (155 µV)
LINE Input (Mono) -54 dBu (1.55 mV)
LINE Input (Stereo) -34 dBu (15.5 mV)
Power Amplier Input +6 dBu (1.55 V)
Maximum Level, mixing desk
MIC inputs + 11 dBu
Mono Line inputs + 30 dBu
Stereo Line inputs + 20 dBu
All other inputs + 20 dBu
Record Send output + 14 dBu
All other outputs + 20 dBu
Input Impedances
MIC 1.8 kOhms
Insert Return 10 kOhms
EQ Input and 2 Track Return 15 kOhms
All other inputs > 15 kOhms
Output Impedances
Record Send 1 kOhm
Phones 47 Ohms
All other outputs 75 Ohms
Equivalent Input Noise, MIC Input, A-weighted, 150 Ohms -130 dBu
Noise, Channel inputs to Main L/R outputs, A-weighted
Master fader down -90 dBu
Master fader 0 dB, Channel fader down -89 dBu
Master fader 0 dB, Channel fader 0 dB, Channel gain unity -83 dBu
Signal/Noise-Ratio, power amplier, A-weighted 105 dB
Equalization
LO Shelving ± 15 dB / 60 Hz
MID Peaking, mono inputs ± 15 dB / 2.4 kHz
MID Peaking, stereo inputs ± 15 dB / 2.4 kHz
HI Shelving ± 15 dB / 12 kHz
Master EQ, 2x7-band, 63, 125, 400, 1k, 2k5, 6k, 12k Hz ± 10 dB
Power Consumption at 1/8 maximum output power, 4 Ohms 450 W
Dimensions, (WxHxD), mm 461.5 x 176.5 x 366.5
Weight, without lid 13kg
Optional
RMK-600 (Rack-Mount-Kit PowerMate600) 112 741
FS11 (Footswitch) 110 693
 previous next