Filter
Top Products
6
Setting up your microphone system
Setting up your microphone system
The following illustration shows two basic ways to connect your receiver
to an amplifier.
Note: When you install the receiver, make sure that it is at
least 10 feet (3 meters) off the floor and at least 10 feet (3
meters) away from surrounding walls.
To set up the receiver:
1 Place the receiver on a flat, stable surface.
2 Fully extend the antenna, and make sure it is perpendicular
to the receiver.
3 Plug one end of the audio cable into the AUDIO OUT jack on
the receiver.
4 Plug the other end of the audio cable into the MIX IN or
AUX IN on an external amplifier.
Audio mixer
Receiver
Amplifier
Speaker
Speaker
Karaoke amplifier